performance parts 4 sale
10-18-2008, 11:29 AM
#1
TECH Regular
Thread Starter
iTrader: (2)
Join Date: May 2004
Location: Kitchener, Ontario
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
performance parts 4 sale Hey Guys,
Well i am selling off everything, i have all the right parts here to make a 600-1000hp car all hi-end parts SO PLEASE NO LOW BALLERS
This is off my 95 T/A
I HAVE PICS OF EVERYTHING I WILL POST OR I CAN EMAIL THEM
Vortech cog pulleys 36mm, 78 teeth crank/30 blower
custom 4" suck side and air filter
vortech mondo BOV
Alky control kit
singal kit & new dual kit as well, with an new extra pump $440------- ON HOLD
Nitrous Outlet elbow for Vic intake i will through this in with the heads and intake
Vic Jr intake with fuel rails its fully ported and matched to the heads this stuff is a one off
matching AFR 220 heads
These are Z8's old AFR heads(220) that were ported by GTP that flow 330cfm@.600 and mating Vic intake you will not find another set of heads like this with shaft mounts 1.7r $3000.00
Qa1 for the front (newish) with 250lbs springs and shims $275
sphoon TQ arm $375
short block 355.....blower/nos set up
eagle rods 4340
eagle 4340
Je blower pistions
4 bolt main
balanced
ATi extra keyed crank
e-water
custom Bret B blower cam
Morrel's lifters
MAKE OFFERS ON ENG OR I CAN PART OUT
9" from DLS
35 spline axles
detroit locker
drive shaft for M6 tranny to match up with the 9" to handle 1000hp $2000.00
2 magnaflow cats new $125
Canton LT1 Valve Covers $155 new
weld wheels
15x5 front with tires
15x10.5 with 7.5 bs and hoosher slicks $600
NEW MSD DIG 6 NEW 275.00
IF DOING PAYPAL ADD 3%
obo
Well i am selling off everything, i have all the right parts here to make a 600-1000hp car all hi-end parts SO PLEASE NO LOW BALLERS
This is off my 95 T/A
I HAVE PICS OF EVERYTHING I WILL POST OR I CAN EMAIL THEM
Vortech cog pulleys 36mm, 78 teeth crank/30 blower
custom 4" suck side and air filter
vortech mondo BOV
Alky control kit
singal kit & new dual kit as well, with an new extra pump $440------- ON HOLD
Nitrous Outlet elbow for Vic intake i will through this in with the heads and intake
Vic Jr intake with fuel rails its fully ported and matched to the heads this stuff is a one off
matching AFR 220 heads
These are Z8's old AFR heads(220) that were ported by GTP that flow 330cfm@.600 and mating Vic intake you will not find another set of heads like this with shaft mounts 1.7r $3000.00
Qa1 for the front (newish) with 250lbs springs and shims $275
sphoon TQ arm $375
short block 355.....blower/nos set up
eagle rods 4340
eagle 4340
Je blower pistions
4 bolt main
balanced
ATi extra keyed crank
e-water
custom Bret B blower cam
Morrel's lifters
MAKE OFFERS ON ENG OR I CAN PART OUT
9" from DLS
35 spline axles
detroit locker
drive shaft for M6 tranny to match up with the 9" to handle 1000hp $2000.00
2 magnaflow cats new $125
Canton LT1 Valve Covers $155 new
weld wheels
15x5 front with tires
15x10.5 with 7.5 bs and hoosher slicks $600
NEW MSD DIG 6 NEW 275.00
IF DOING PAYPAL ADD 3%
obo
10-18-2008, 01:39 PM
#2
Jeremy, why are you listing the valve covers so sale that I pay pal'd you for and have yet to recieve so much as a tracking number for? I have been off shore so I was trusting you shipped them, but now I see the for sale and when I call my family and they tell me nothing has come for me, getting a little worried I got ripped off.
Last edited by BizZzatch350; 10-18-2008 at 01:58 PM.
10-18-2008, 02:30 PM
#4
Paypal sent on Oct 2nd, I also sent two e-mails. Funny you stopped replying after the paypal was sent, then I see today on the 18th, you post those valve covers up for sale. Funny, I thought I bought those, kind of find it odd you dont reply after the payment is sent. I opened a dispute with paypal also, so I hope we can work this out.
From his post on the 15th, keep in mind paypal was sent on the 2nd
Every thing MUST incluse those valve covers I pay pal'd him for but I guess he thought I would just forget about. Not cool
From his post on the 15th, keep in mind paypal was sent on the 2nd
Every thing MUST incluse those valve covers I pay pal'd him for but I guess he thought I would just forget about. Not cool
Last edited by BizZzatch350; 10-18-2008 at 02:55 PM.
i was also interested in the wheels 
