LT1 Performance parts clean out
#1
LT1 Performance parts clean out
Lingenfelter 58mm throttle body. Complete with TPS and connector. It is originally for a TPI but with the TPS connector it can be used on an LT1 which is what its coming off. SOLD
LT1 fuel rail with Aeromotive adjustable pressure regulator and pressure gauge. Was previously modified to use AN fittings but is setup for stock style quick connects. SOLD
LT1 intake manifold has been gasket matched and openned up for 58mm throttle body SOLD
Used Complete Optispark distributor vented style 95-97 cap and rotor has 10,000 miles. SOLD
LT1 OBDII pcm have 2. Both have M6 tune loaded one stock one modified SOLD
LT4 knock module. The part that goes in the pcm not the sensor. SOLD
Comp Pro Magnum 1.6 roller rockers. Non self aligning with 7/16" ARP studs and Trickflow guideplates for LT1. Comp 26918 Valvesprings (will need 787-16 retainers.) SOLD
Delphi Mass airflow sensor #25168491 85mm used on Z06 vettes comes with jumper harness to be used on F-bodies SOLD
Comp cams 977 double valve springs and 730 10 deg titanium retainers SOLD
LT1 fuel rail with Aeromotive adjustable pressure regulator and pressure gauge. Was previously modified to use AN fittings but is setup for stock style quick connects. SOLD
LT1 intake manifold has been gasket matched and openned up for 58mm throttle body SOLD
Used Complete Optispark distributor vented style 95-97 cap and rotor has 10,000 miles. SOLD
LT1 OBDII pcm have 2. Both have M6 tune loaded one stock one modified SOLD
LT4 knock module. The part that goes in the pcm not the sensor. SOLD
Comp Pro Magnum 1.6 roller rockers. Non self aligning with 7/16" ARP studs and Trickflow guideplates for LT1. Comp 26918 Valvesprings (will need 787-16 retainers.) SOLD
Delphi Mass airflow sensor #25168491 85mm used on Z06 vettes comes with jumper harness to be used on F-bodies SOLD
Comp cams 977 double valve springs and 730 10 deg titanium retainers SOLD
Last edited by flame; 12-09-2008 at 08:59 PM. Reason: price drop