SB2's, BBC's short and long blocks for sale cheap!!!
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
We have a large inventory of engines and need to make room for more new ones.
Short blocks.
SB2 353 Dry sump, 4.170" bore, 4 bolt splayed, roller cam eng, Clevitte bearings, Bryant 3.260" crank, dyers 6.200" rods with 2.00" pins, JE pistons/rings, FRESH for $3200.00
454 330hp short block 4 bolt genV stock JE pistons/rings, std./std. crank rods stock 4.280 bore, 4.00" stroke. Only $2200.00
BBC short 4.280/4.00 gm forged crank and rods, JE flat tops $2900.00
Long blocks
Two BBC 502/500hp engines. New 4 bolt blocks stock JE pistons/rings, GM std/std cranks, Clevitte balanced, 4.467 stock bore X 4.00" stroke. 500hp valve train cam and lifters. No oil pan or intake. $7,200.00 each. SOLD!!!
SB2 long block 359ci, Dry sump 12:1 comp, 4.185X3.270, Roller cam bearings, Bryant crank, Dyers 6.250" rods with Honda pins, fully ported SB@ heads with 45.2cc chambers, Xceldyne titanium int and exh valves. Jesel rockers and belt drive, Baker designed camshaft, Pro/Cam dry sump pan and fuel pump, valve covers with oilers, MSD dist. Aluminum water pump, Dyno tuned and tested only FRESH and ready to race. $17,000.00
We also have a few stock(ish) BBC long blocks and short blocks. Also boost ready LS1-6-7, LM7's and v-6's.......
Also items are open to reasonable offers too.
Feel free to call or email with any questions
TJ
beitj@michwave.com
616-837-8975
Short blocks.
SB2 353 Dry sump, 4.170" bore, 4 bolt splayed, roller cam eng, Clevitte bearings, Bryant 3.260" crank, dyers 6.200" rods with 2.00" pins, JE pistons/rings, FRESH for $3200.00
454 330hp short block 4 bolt genV stock JE pistons/rings, std./std. crank rods stock 4.280 bore, 4.00" stroke. Only $2200.00
BBC short 4.280/4.00 gm forged crank and rods, JE flat tops $2900.00
Long blocks
Two BBC 502/500hp engines. New 4 bolt blocks stock JE pistons/rings, GM std/std cranks, Clevitte balanced, 4.467 stock bore X 4.00" stroke. 500hp valve train cam and lifters. No oil pan or intake. $7,200.00 each. SOLD!!!
SB2 long block 359ci, Dry sump 12:1 comp, 4.185X3.270, Roller cam bearings, Bryant crank, Dyers 6.250" rods with Honda pins, fully ported SB@ heads with 45.2cc chambers, Xceldyne titanium int and exh valves. Jesel rockers and belt drive, Baker designed camshaft, Pro/Cam dry sump pan and fuel pump, valve covers with oilers, MSD dist. Aluminum water pump, Dyno tuned and tested only FRESH and ready to race. $17,000.00
We also have a few stock(ish) BBC long blocks and short blocks. Also boost ready LS1-6-7, LM7's and v-6's.......
Also items are open to reasonable offers too.
Feel free to call or email with any questions
TJ
beitj@michwave.com
616-837-8975
Last edited by hellbents10; 03-04-2009 at 08:27 AM.
Trending Topics
#8
Teching In
Join Date: May 2009
Location: Greensboro, NC
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
..... Hey, while your looking up stairs check and see if you have a bare SB2 I would like to invest in a SB2 for my s10 build. And if the internals for the 353 could be used by another racer I would gladly take the block off your hands! (Payment in hand!!)