357 SBC and more. 10.86@121.94 at 2720lb
04-05-2009, 12:03 PM
#1
357 SBC and more. 10.86@121.94 at 2720lb 357 SBC 4-bolt main
3.48 stroke forged crank
6 inch Eagle H-Beam rods
Wiseco pistons 12.4:1 compression
Pro Topline heads 220 Runners 2.055 IN 1.6 EX
Comp solid cam (part# 12-515-5 and I have cam card)
Duration @50 259 IN 266 EX Lift is .550 IN .570 Ex Lobe separation of 106
Crane roller rocker and Crane Stud Girdle
Edelbrock Victor Jr intake
750 Holley DP carb. (needs a rebuild)
Electric motor driven water pump
MSD distributor
New wires, cap, and Blaster SS Coil (not shown in picture)
I will also include the ignition and 2 step as I won't need it. (MSD 6AL I believe)
I owned it one season as it came in the Vega I bought. My best was a 10.86@121.94 at 2720lbs through a powerglide and Dana 60 rearend.
I have an in car vide of a run. Motor has small miss from a fuel pump that wasn't keeping up. I fixed that and the miss was gone so just remember that when listening to the video.
I did not freshing it up at all after I bought it and ran it about 50 times last year.
Car did not leak anything or smoke but I don't think it would be a bad idea to freshen it up but that is up to you of course. I think I am pricing it at a good enough price to make it well worth your while.
I comes with everything but headers to drop into your project.
I do not want to ship so I would rather any interest parties stop by the shop it is located in and take a look at it. I do plan on bring it home so it will be easier to look at sometime next week. I can pull the pan or whatever to look it over. I have personally not opened the motor up.
Motor was pulled working fine as I am putting an LS based motor in for this year.
Video of it running can be seen at www.ls1vega.com It is the 2 in car camera views.(excuse the crappy starts, I was learning how to use my delay box)
I will attach some pictures of the engine compartment with the motor in it earlier this year. Pictures do not reflect the new coil, wires, and cap.
I am in the Livonia Michigan area so please feel free to ask any questions and I will answer to the best of my ability.
Asking $2500 for everything listed.
Ken
Video at www.ls1vega.com
3.48 stroke forged crank
6 inch Eagle H-Beam rods
Wiseco pistons 12.4:1 compression
Pro Topline heads 220 Runners 2.055 IN 1.6 EX
Comp solid cam (part# 12-515-5 and I have cam card)
Duration @50 259 IN 266 EX Lift is .550 IN .570 Ex Lobe separation of 106
Crane roller rocker and Crane Stud Girdle
Edelbrock Victor Jr intake
750 Holley DP carb. (needs a rebuild)
Electric motor driven water pump
MSD distributor
New wires, cap, and Blaster SS Coil (not shown in picture)
I will also include the ignition and 2 step as I won't need it. (MSD 6AL I believe)
I owned it one season as it came in the Vega I bought. My best was a 10.86@121.94 at 2720lbs through a powerglide and Dana 60 rearend.
I have an in car vide of a run. Motor has small miss from a fuel pump that wasn't keeping up. I fixed that and the miss was gone so just remember that when listening to the video.
I did not freshing it up at all after I bought it and ran it about 50 times last year.
Car did not leak anything or smoke but I don't think it would be a bad idea to freshen it up but that is up to you of course. I think I am pricing it at a good enough price to make it well worth your while.
I comes with everything but headers to drop into your project.
I do not want to ship so I would rather any interest parties stop by the shop it is located in and take a look at it. I do plan on bring it home so it will be easier to look at sometime next week. I can pull the pan or whatever to look it over. I have personally not opened the motor up.
Motor was pulled working fine as I am putting an LS based motor in for this year.
Video of it running can be seen at www.ls1vega.com It is the 2 in car camera views.(excuse the crappy starts, I was learning how to use my delay box)
I will attach some pictures of the engine compartment with the motor in it earlier this year. Pictures do not reflect the new coil, wires, and cap.
I am in the Livonia Michigan area so please feel free to ask any questions and I will answer to the best of my ability.
Asking $2500 for everything listed.
Ken
Video at www.ls1vega.com
