1996 Trans Am part out!
07-28-2009, 02:27 PM
#1
Banned
Thread Starter
iTrader: (13)
Join Date: Jan 2008
Location: Alvin,Tx
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
1996 Trans Am part out! We have decided to go another route and will be selling the 1996 Trans am. This is a T-top car. This car does have a clear title ready to go to the new owner. Car does have all wiring as well as a PCM with a tune for a 355LT1 h/c/i and a 150 shot of nitrous. It will come with all stock suspension parts. Also has Sportline springs. It does have a 10 bolt rear end with 3.73 gear. Also has LCA relocation brackets and a set of weld in subframe connectors. The car does have a WS6 hood that I replaced as the car had a little damage from an accident. the bumper cover is able to be reused. The passenger side fender has a 1-2inch tear in it but can be plastic welded as that was the route we were going to go. It does have good gray leather interior with all panels/pieces. The drivers side seat has a small tear in the bolster but thats about the only major problem with the interior. Airbags are intact and never depoloyed. This is an original auto car. I will also include a rebuildable auto tranny with it. It shifted but would hang up under WOT in 2nd gear. Asking 2k
the car does have all 4 wheels. They are T/A 16'' wheels with tires to roll but definitely not road trip worthy. I was removing the full suspension we had installed in the car in these pics thats the only reason the rear wheels were off. Car will be ready to pick up next weekend. Please call 832 205 7268 or text me. Post up questions as well.
well since no interest in the roller yet and I need this thing gone soon. It is going to be parted out. Post up what you need and we can go from there.
WS6 hood - 400$
T/A bumper cover needs work but definitely worth using - 200$
Leather Seats (one tear on the bolsture on drivers side, pass side head rest has a few scratches) - 300$ all four
Door panels in great shape - 100$ each
Glove box door - 50$
Upgraded 4l60 with low miles - 600$
rebuildable core 4l60 (shifted but hung up in 2nd) - 50$
OBD I pcm with PCMforLess tune for 355 HCI N2o - 125
Good working radiator - 100$
drivers side fender no issues - 75$
pass side has small tear but repairable - 50$
Ceramic coated LT's believe they are pace setters with matching Y pipe has some dings/dents from road use but very good shape and useable - 275$ together
I am sure I will be adding more so look for a more updated list later this afternoon.
Dash parts are up for sale as well. Post up what you need.
the car does have all 4 wheels. They are T/A 16'' wheels with tires to roll but definitely not road trip worthy. I was removing the full suspension we had installed in the car in these pics thats the only reason the rear wheels were off. Car will be ready to pick up next weekend. Please call 832 205 7268 or text me. Post up questions as well.
well since no interest in the roller yet and I need this thing gone soon. It is going to be parted out. Post up what you need and we can go from there.
WS6 hood - 400$
T/A bumper cover needs work but definitely worth using - 200$
Leather Seats (one tear on the bolsture on drivers side, pass side head rest has a few scratches) - 300$ all four
Door panels in great shape - 100$ each
Glove box door - 50$
Upgraded 4l60 with low miles - 600$
rebuildable core 4l60 (shifted but hung up in 2nd) - 50$
OBD I pcm with PCMforLess tune for 355 HCI N2o - 125
Good working radiator - 100$
drivers side fender no issues - 75$
pass side has small tear but repairable - 50$
Ceramic coated LT's believe they are pace setters with matching Y pipe has some dings/dents from road use but very good shape and useable - 275$ together
I am sure I will be adding more so look for a more updated list later this afternoon.
Dash parts are up for sale as well. Post up what you need.
07-28-2009, 09:47 PM
#3
Banned
Thread Starter
iTrader: (13)
Join Date: Jan 2008
Location: Alvin,Tx
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
pics can be seen here for guages and other items
https://ls1tech.com/forums/texas-cla...l#post11983005
https://ls1tech.com/forums/texas-cla...l#post11983005
Trending Topics
07-29-2009, 02:09 PM
#12
07-30-2009, 11:07 AM
#20
Banned
Thread Starter
iTrader: (13)
Join Date: Jan 2008
Location: Alvin,Tx
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Ground effects are in good shape. Ill try and get out to my storage lot for a pic soon.
Doors are in excellent shape. Will sell the door with mirror and window glass - door panel. Let me know if your still interested.
Doors are in excellent shape. Will sell the door with mirror and window glass - door panel. Let me know if your still interested.