Lt1 odds and ends, and a few audio things!
#1
Lt1 odds and ends, and a few audio things!
ok, so it's nothing special but here are a few things i have for sale.
first off is the lt1 stuff: Remember all prices are obo, and include shipping unless stated otherwise.
All pictures are clickable for bigger sizes.
1 optispark harness: SOLD
1 working windshield wiper fluid pump:$10 shipped
1 lt1 MAP sensor:SOLD
all these lt1 parts were removed from a 97 z28 lt1, i'm not sure if the map sensor works or not though, everything else is fine.
now for the audio odds and ends:
1 alpine V12 mrv-f303 amp; 4/3/2 channel amplifier:$30+shipping
specs:
Power Output: RMS Continuous Power (at 12.0V, 20 Hz to 20kHz)
Per channel into 4 ohms
30W, 0.08% THD
Per channel into 2 ohms
40W, 0.3% THD
Bridged into 4 ohms
80W, 0.3% THD
Power Output: RMS Continuous Power (at 14.4V, 20 Hz to 20kHz)
Per channel into 4 ohms
50W, 0.08% THD
Per channel into 2 ohms
60W, 0.3% THD
Bridged into 4 ohms
120W, 0.3% THD
Power Output: RMS Continuous Power (at 14.4V, 20 Hz)
Per channel into 4 ohms
90W, 10% THD
Bridged into 4 ohms
240W, 0.3% THD
1 Kicker kx350.4, 4 channel amplifier:SOLD
specs:# 4-channel car amplifier
# 60 watts RMS x 4 at 4 ohms (90 watts RMS x 4 at 2 ohms)
# 175 watts RMS x 2 in bridged mode (4-ohm stable in bridged mode)
# variable high-pass/low-pass filters (50-200 Hz, 12 dB/octave)
# variable bass boost (0-18 dB at 40 Hz) with wired remote level control
# speaker- and preamp-level inputs
# CEA-2006 compliant
# Tri-way capable (Tri-Way crossover required)
# fuse rating: 20A x 2
# 8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
# 15-3/4"W x 2-9/16"H x 9-15/16"D
1 Old Alpine cdm-7835 CD receiver headunit: $10+shipping
Does not have harness or remote.
specs:
CD shuffle control
regulated 1 bit DAC
35 watts x 4 channels amplifier
1 Alpine CDA-9847 CD receiver headunit:SOLD
Includes Remote control pictured, and harness.
specs:
# CD receiver with built-in amplifier (18 watts RMS/50 peak x 4 channels)
# detachable face with rotary control and Quick Search
# plays CDs, CD-Rs, and CD-RWs including discs burned with MP3 and WMA files
# Bass Engine
# displays CD Text, MP3 and WMA titles
# XM and SIRIUS Satellite Radio controls
# CD changer controls for Alpine Ai-NET changers only
# front, rear, and subwoofer preamp outputs
# compatible with Alpine iPod control interface
# clock
# CEA-2006 compliant amplifier
# CD frequency response 5-20,000 Hz
# CD signal-to-noise ratio 105 dB
# FM sensitivity 9.3 dBf
1 XM satellite radio box XMd1000: $65 shipped
includes cables and "TERK xmdalp100" XM direct smart digital adapter for alpine car stereos, but does not include antenna.
specs:
# XM-certified universal XM tuner module
# single-cable antenna connection
# connects to compatible receiver with a brand-specific adapter (included!)
# select channel name, channel number, artist, song title, or category name to appear on receiver's display
# channel scan/search
# channel presets
# dimensions: 4-1/2"W x 1-5/16"H x 5-1/8"D (tuner)
if interested in a non-shipping included item ("+shipping") pm me your zipcode and what you're interested in, and i'll get you a quote asap!
Any questions? feel free to send me a pm, i'd be happy to help you out.
Thanks,
Seth Jordan
first off is the lt1 stuff: Remember all prices are obo, and include shipping unless stated otherwise.
All pictures are clickable for bigger sizes.
1 optispark harness: SOLD
1 working windshield wiper fluid pump:$10 shipped
1 lt1 MAP sensor:SOLD
all these lt1 parts were removed from a 97 z28 lt1, i'm not sure if the map sensor works or not though, everything else is fine.
now for the audio odds and ends:
1 alpine V12 mrv-f303 amp; 4/3/2 channel amplifier:$30+shipping
specs:
Power Output: RMS Continuous Power (at 12.0V, 20 Hz to 20kHz)
Per channel into 4 ohms
30W, 0.08% THD
Per channel into 2 ohms
40W, 0.3% THD
Bridged into 4 ohms
80W, 0.3% THD
Power Output: RMS Continuous Power (at 14.4V, 20 Hz to 20kHz)
Per channel into 4 ohms
50W, 0.08% THD
Per channel into 2 ohms
60W, 0.3% THD
Bridged into 4 ohms
120W, 0.3% THD
Power Output: RMS Continuous Power (at 14.4V, 20 Hz)
Per channel into 4 ohms
90W, 10% THD
Bridged into 4 ohms
240W, 0.3% THD
1 Kicker kx350.4, 4 channel amplifier:SOLD
specs:# 4-channel car amplifier
# 60 watts RMS x 4 at 4 ohms (90 watts RMS x 4 at 2 ohms)
# 175 watts RMS x 2 in bridged mode (4-ohm stable in bridged mode)
# variable high-pass/low-pass filters (50-200 Hz, 12 dB/octave)
# variable bass boost (0-18 dB at 40 Hz) with wired remote level control
# speaker- and preamp-level inputs
# CEA-2006 compliant
# Tri-way capable (Tri-Way crossover required)
# fuse rating: 20A x 2
# 8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
# 15-3/4"W x 2-9/16"H x 9-15/16"D
1 Old Alpine cdm-7835 CD receiver headunit: $10+shipping
Does not have harness or remote.
specs:
CD shuffle control
regulated 1 bit DAC
35 watts x 4 channels amplifier
1 Alpine CDA-9847 CD receiver headunit:SOLD
Includes Remote control pictured, and harness.
specs:
# CD receiver with built-in amplifier (18 watts RMS/50 peak x 4 channels)
# detachable face with rotary control and Quick Search
# plays CDs, CD-Rs, and CD-RWs including discs burned with MP3 and WMA files
# Bass Engine
# displays CD Text, MP3 and WMA titles
# XM and SIRIUS Satellite Radio controls
# CD changer controls for Alpine Ai-NET changers only
# front, rear, and subwoofer preamp outputs
# compatible with Alpine iPod control interface
# clock
# CEA-2006 compliant amplifier
# CD frequency response 5-20,000 Hz
# CD signal-to-noise ratio 105 dB
# FM sensitivity 9.3 dBf
1 XM satellite radio box XMd1000: $65 shipped
includes cables and "TERK xmdalp100" XM direct smart digital adapter for alpine car stereos, but does not include antenna.
specs:
# XM-certified universal XM tuner module
# single-cable antenna connection
# connects to compatible receiver with a brand-specific adapter (included!)
# select channel name, channel number, artist, song title, or category name to appear on receiver's display
# channel scan/search
# channel presets
# dimensions: 4-1/2"W x 1-5/16"H x 5-1/8"D (tuner)
if interested in a non-shipping included item ("+shipping") pm me your zipcode and what you're interested in, and i'll get you a quote asap!
Any questions? feel free to send me a pm, i'd be happy to help you out.
Thanks,
Seth Jordan
Last edited by scj; 11-04-2009 at 05:58 PM.