lots of go fast Lt1 Part
#1
TECH Enthusiast
Thread Starter
iTrader: (5)
Join Date: Feb 2005
Location: Germantown, MD
Posts: 538
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
these parts are off my 9sec lt1. I tore down the engine and decided to go with different heads/intake/valvetrain over the winter.
These prices are not firm i will take reasonable offers on some of this stuff not the heads though they are priced to sell quick.
190cc AFR headsHeads are 53cc with 2.02/1.60 valves and were ported by a local machine shop(it wasnt a competition port job so these heads still have more left in them if you are willing to spent money on porting these could be a very nice set of heads not that they arelady arent), i dont have the flow sheet in front of me but they flowed 27X@500 and high 28X@600lift, i also have an unported but port matched intake to go along with it and a Edelbrock 52mm TB
Crane double valve springs
Comp Cam Tiatanium Retainers
Comp Cam aliminum 1.6RRs
Comp Cam Chromoly Pushrods
Polished Tall Vavle Covers for Lt1
Will take $1500 for everything. I will personally take the heads to the machine shop, will have them cleaned and pressure checked.
Or i can seperate the valve covers/rockers/TB
prices on those are
Heads only complete $1200
RR would be $145
Valve covers(lt1 specific to clear altenator) i paid over 200 for them $95
TB $145 the billet z28 plate alone was $80
ATI Flex Plate SFI aproved---this is an externaly ballanced flex plate for stock balanced lt1s comes with bolts 2 months old $75
Hooker long tube coated headers, coating on them is still in very good condition some very small scrapes and some surface rust but other then that they are in great shape(car was garage Kept)
Paid $650 for them will take $250
Custom made 3" H Pipe with magnaflow S/S mufflers and Turndowns, mufflers are $120 a piece i will let go the whole thing for $325 its also few months old . This can be modified to fit an LS1 Fbody with longtubes for a small fee
Willing to take offers on some of the stuff but pretty Firm on the head package.
![](http://i95.photobucket.com/albums/l141/LTWON1/000_0258.jpg)
![](http://i95.photobucket.com/albums/l141/LTWON1/000_0256.jpg)
These prices are not firm i will take reasonable offers on some of this stuff not the heads though they are priced to sell quick.
190cc AFR headsHeads are 53cc with 2.02/1.60 valves and were ported by a local machine shop(it wasnt a competition port job so these heads still have more left in them if you are willing to spent money on porting these could be a very nice set of heads not that they arelady arent), i dont have the flow sheet in front of me but they flowed 27X@500 and high 28X@600lift, i also have an unported but port matched intake to go along with it and a Edelbrock 52mm TB
Crane double valve springs
Comp Cam Tiatanium Retainers
Comp Cam aliminum 1.6RRs
Comp Cam Chromoly Pushrods
Polished Tall Vavle Covers for Lt1
Will take $1500 for everything. I will personally take the heads to the machine shop, will have them cleaned and pressure checked.
Or i can seperate the valve covers/rockers/TB
prices on those are
Heads only complete $1200
RR would be $145
Valve covers(lt1 specific to clear altenator) i paid over 200 for them $95
TB $145 the billet z28 plate alone was $80
ATI Flex Plate SFI aproved---this is an externaly ballanced flex plate for stock balanced lt1s comes with bolts 2 months old $75
Hooker long tube coated headers, coating on them is still in very good condition some very small scrapes and some surface rust but other then that they are in great shape(car was garage Kept)
Paid $650 for them will take $250
Custom made 3" H Pipe with magnaflow S/S mufflers and Turndowns, mufflers are $120 a piece i will let go the whole thing for $325 its also few months old . This can be modified to fit an LS1 Fbody with longtubes for a small fee
Willing to take offers on some of the stuff but pretty Firm on the head package.
![](http://i95.photobucket.com/albums/l141/LTWON1/000_0258.jpg)
![](http://i95.photobucket.com/albums/l141/LTWON1/000_0256.jpg)
![](http://i95.photobucket.com/albums/l141/LTWON1/000_0257.jpg)
Last edited by LittleRedZ; 11-14-2007 at 03:23 PM.
#2
TECH Fanatic
iTrader: (2)
Join Date: Aug 2006
Location: Bryant, AR
Posts: 1,008
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
pics of the valve covers to nis43243@obu.edu
honestly...if i had 1500. I would take the whole lot, except for the RR's, i like my Comp RR's ^_^
honestly...if i had 1500. I would take the whole lot, except for the RR's, i like my Comp RR's ^_^
#3
TECH Enthusiast
Thread Starter
iTrader: (5)
Join Date: Feb 2005
Location: Germantown, MD
Posts: 538
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
pics of the valve covers to nis43243@obu.edu
honestly...if i had 1500. I would take the whole lot, except for the RR's, i like my Comp RR's ^_^
honestly...if i had 1500. I would take the whole lot, except for the RR's, i like my Comp RR's ^_^
Trending Topics
#8
TECH Enthusiast
Thread Starter
iTrader: (5)
Join Date: Feb 2005
Location: Germantown, MD
Posts: 538
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Ok i'm getting alot of questions about the exhaust, i will take some pics if people are serious, paying shipping wouldnt be cheap on this thing i would imagine its about 30-40 lbs and 35in wide X 70 in long. Its 2 months old the car is stored in the shop and never seen rain or snow in the past 4 years. Only use on the H pipe is from Dyno time and Track, car was never really driven on the street beside going back and forth to the dyno which is 1-2 miles away from my shop.