Lt1 Heads/cam
01-29-2008, 11:40 PM
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Dec 2007
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Lt1 Heads/cam Im doing some minor changes to my ol' LT1 and have some parts for sale . All parts that came off the car just got back from engine shop in Tomball G&G PERFORMANCE ENGINES
Ported and polished LT1 intake with fuel rails
Holley 52 mm throttle body
FMS 30 # fuel injectors
Lt1 heads featured 200 intake ports with a 61 cc. Heads include Ferrea 2.05 intake and 1.56 exhaust valves, comp cam springs , all new retainers ,locks, guideplates and 3/8 studs. 3 angle valve job.
Heads have been flowed :
290 cfm @ .650 intake
208 cfm @ .650 exhuast
I do have flow sheet .
Heads also come with Comp Pro Magnum 1:6 rocker arms , Futral Motorsports chromoly pushrods, Comp lifters and AFR Hydra Rev Kit to prevent valve float at high rpms .
Cam motion custom ground camshafts
234/241@50 with a 113 Lsa ( Hydraulic Roller )
.577/.596 lift
Never got a horsepower number out of car due to lost of oil pressure on first dyno pull @ G Force . This setup should make 400 -450 hp depending on your drive train .
This is a matching heads and cam setup, DO NOT WANT TO SELL SEPRATE .
Asking price $ 2,250 or best offer SOLD
Also have Wolfe 6 point roll cage $ 175 SOLD
Pair of Competition Engineering 3 way adjustable rear shocks $ 50 or best offer SOLD
GM 10 bolt rear end with Moser 28 spline axles , Eaton posi unit , 7/16 wheel studs, axle tube are welded for extra strength , and has TA cover . All it needs is your choice of gear ratio. $ 400 or best offer
Ported and polished LT1 intake with fuel rails
Holley 52 mm throttle body
FMS 30 # fuel injectors
Lt1 heads featured 200 intake ports with a 61 cc. Heads include Ferrea 2.05 intake and 1.56 exhaust valves, comp cam springs , all new retainers ,locks, guideplates and 3/8 studs. 3 angle valve job.
Heads have been flowed :
290 cfm @ .650 intake
208 cfm @ .650 exhuast
I do have flow sheet .
Heads also come with Comp Pro Magnum 1:6 rocker arms , Futral Motorsports chromoly pushrods, Comp lifters and AFR Hydra Rev Kit to prevent valve float at high rpms .
Cam motion custom ground camshafts
234/241@50 with a 113 Lsa ( Hydraulic Roller )
.577/.596 lift
Never got a horsepower number out of car due to lost of oil pressure on first dyno pull @ G Force . This setup should make 400 -450 hp depending on your drive train .
This is a matching heads and cam setup, DO NOT WANT TO SELL SEPRATE .
Asking price $ 2,250 or best offer SOLD
Also have Wolfe 6 point roll cage $ 175 SOLD
Pair of Competition Engineering 3 way adjustable rear shocks $ 50 or best offer SOLD
GM 10 bolt rear end with Moser 28 spline axles , Eaton posi unit , 7/16 wheel studs, axle tube are welded for extra strength , and has TA cover . All it needs is your choice of gear ratio. $ 400 or best offer
Last edited by rg96lt1; 03-03-2008 at 09:07 PM.
01-30-2008, 01:38 PM
#2
Pair of Competition Engineering 3 way adjustable rear shocks $ 50 or best offer
how much are u looking for shipped to md 20754 and what springs are needed with this kit?
How many miles and what condition are they in and do you have pictures and a part number?
how much are u looking for shipped to md 20754 and what springs are needed with this kit?
How many miles and what condition are they in and do you have pictures and a part number?
