Parting out 78 Malibu stock suspension / drag radial project
02-19-2008, 08:22 PM
#1
TECH Enthusiast
Thread Starter
iTrader: (29)
Join Date: Aug 2003
Location: Dallas TX
Posts: 662
Likes: 0
Received 0 Likes
on
0 Posts
Parting out 78 Malibu stock suspension / drag radial project Shipping not included but depending on what you want I may work with you on the shipping.
new in box Griffin Radiator SOLD
$160.00 1-25272-x
QA1 shocks
Stocker all stars
rear new in the box $220.00pr SOLD
front slightly used $180.00pr SOLD
Rear center section package brand new except gears
-MW light weight 35 spline spool new $318
-MW bolt through case new $592
-MW 7/16" stud pinon support new $275
-new bearings $54
-new mis hardware $53
-used 3.90 gears set up and ready to go
I will take 1200.00 for the package SOLD
Axles and housing pakage
MW superlite axles new 680.00 new
bearings new 85.00
new 5/8" drive stud kit length for alumastar/Magmum wheels 110.00
stock width bolt in housing with backbrace welded on and straightened after welding Axles must be used with a M/W 35 spline spool
package 1000.00 SOLD
New Wolfe rear uppper / lower rear control arm set
complete set installed but never used with new in the box spherical upper alumninum bushings
$450.00 SOLD
Heads, intake, and rockers
Heads and intake were done by Trevor Johnson one of the better porters in the country
Fresh ready to go Brodix T1X heads bowl ported, milled 53cc chamber, matched ported Super Victor, and brand new Jessle rockers (required for these heads) package deal $2500.00 @28"
.200 143/105
.300 202/149
.400 244/177
.500 273/196
.600 292/207
.700 296/211
Manual steering box used off S-10
60.00 SOLD
Used NOS progressive controler
$250.00
Used product engineering 460GPH pump/filter combo
$350.00
NOS front bumper corner fillers
60.00 for the pair
new in box B/M #2737 race cooler
$60.00 SOLD
new Moroso #20191 oil pan
Installed but never even fired $160.00
slightly used 3" driveshaft
for 9" and TH350/glide. 1320 solid joints and HD slip yoke 51.5" center to center
$200.00
new 10 gal alumimum fuel cell
100.00 SOLD
Used carb shop custom built 920cfm carb
$350.00
used Hooker super comps SBC (over the frame)Surface rusted but good shape $150.00 [/b] SOLD
New in box Autometer playback tach
#6862 number does not come up any more but was a 375.00 tach 3 years ago
$300.00
New cloyes true roller 93100a
installed but never fired 100.00
Aluminum core support
Needs a touch more trimming around the headlights to fit in a Bu' perfect
$200.00 SOLD
New Corbeau Forza black cloth seats
One never even out of package $325.00 pair SOLD
New in box CVR starter
$125.00 SOLD
New in box Gforce cam lock belt set
probably out of date but would work good for a street car or passenger saet
$100.00 SOLD
new in box Meziure electric W/P silver
with 1/3/4" hose fitting
$270.00 SOLD
new SBC A/C Delco fabbed aluminum valve covers black
Installed but never fired no holes cut
$200.00
Rolling body with moly cage and Wolfe anti role bar installed.
Rust free original paint car will have stock hood and core support back on it. Will also have a stock rear to roll around. $3000.00 SOLD
new in box Griffin Radiator SOLD
$160.00 1-25272-x
QA1 shocks
Stocker all stars
rear new in the box $220.00pr SOLD
front slightly used $180.00pr SOLD
Rear center section package brand new except gears
-MW light weight 35 spline spool new $318
-MW bolt through case new $592
-MW 7/16" stud pinon support new $275
-new bearings $54
-new mis hardware $53
-used 3.90 gears set up and ready to go
I will take 1200.00 for the package SOLD
Axles and housing pakage
MW superlite axles new 680.00 new
bearings new 85.00
new 5/8" drive stud kit length for alumastar/Magmum wheels 110.00
stock width bolt in housing with backbrace welded on and straightened after welding Axles must be used with a M/W 35 spline spool
package 1000.00 SOLD
New Wolfe rear uppper / lower rear control arm set
complete set installed but never used with new in the box spherical upper alumninum bushings
$450.00 SOLD
Heads, intake, and rockers
Heads and intake were done by Trevor Johnson one of the better porters in the country
Fresh ready to go Brodix T1X heads bowl ported, milled 53cc chamber, matched ported Super Victor, and brand new Jessle rockers (required for these heads) package deal $2500.00 @28"
.200 143/105
.300 202/149
.400 244/177
.500 273/196
.600 292/207
.700 296/211
Manual steering box used off S-10
60.00 SOLD
Used NOS progressive controler
$250.00
Used product engineering 460GPH pump/filter combo
$350.00
NOS front bumper corner fillers
60.00 for the pair
new in box B/M #2737 race cooler
$60.00 SOLD
new Moroso #20191 oil pan
Installed but never even fired $160.00
slightly used 3" driveshaft
for 9" and TH350/glide. 1320 solid joints and HD slip yoke 51.5" center to center
$200.00
new 10 gal alumimum fuel cell
100.00 SOLD
Used carb shop custom built 920cfm carb
$350.00
used Hooker super comps SBC (over the frame)Surface rusted but good shape $150.00 [/b] SOLD
New in box Autometer playback tach
#6862 number does not come up any more but was a 375.00 tach 3 years ago
$300.00
New cloyes true roller 93100a
installed but never fired 100.00
Aluminum core support
Needs a touch more trimming around the headlights to fit in a Bu' perfect
$200.00 SOLD
New Corbeau Forza black cloth seats
One never even out of package $325.00 pair SOLD
New in box CVR starter
$125.00 SOLD
New in box Gforce cam lock belt set
probably out of date but would work good for a street car or passenger saet
$100.00 SOLD
new in box Meziure electric W/P silver
with 1/3/4" hose fitting
$270.00 SOLD
new SBC A/C Delco fabbed aluminum valve covers black
Installed but never fired no holes cut
$200.00
Rolling body with moly cage and Wolfe anti role bar installed.
Rust free original paint car will have stock hood and core support back on it. Will also have a stock rear to roll around. $3000.00 SOLD
Last edited by gearheads78; 02-27-2008 at 04:12 PM.
02-19-2008, 09:24 PM
#3
TECH Enthusiast
Thread Starter
iTrader: (29)
Join Date: Aug 2003
Location: Dallas TX
Posts: 662
Likes: 0
Received 0 Likes
on
0 Posts
https://ls1tech.com/forums/lsx-parts-sale/865038-new-corbeau-forza-race-seats.html
02-21-2008, 12:26 AM
#4
TECH Enthusiast
Thread Starter
iTrader: (29)
Join Date: Aug 2003
Location: Dallas TX
Posts: 662
Likes: 0
Received 0 Likes
on
0 Posts
cell is gone
I just got off the phone with a buyer that is overnighting me $$ for
body, suspension, radiator,seats, streering box core support, center section and rear axle assembly. Not sure it I should or Getting rid of this car has been a very hard decision.
also rear shocks are sold and paid for
I just got off the phone with a buyer that is overnighting me $$ for
body, suspension, radiator,seats, streering box core support, center section and rear axle assembly. Not sure it I should or Getting rid of this car has been a very hard decision.
also rear shocks are sold and paid for
Last edited by gearheads78; 02-21-2008 at 01:02 PM.
02-24-2008, 09:44 AM
#5
TECH Enthusiast
Thread Starter
iTrader: (29)
Join Date: Aug 2003
Location: Dallas TX
Posts: 662
Likes: 0
Received 0 Likes
on
0 Posts
more stuff B/M PRO Stick
lightly used condition with cover
set up for 3 speed $135.00
new 2 speed gate plate for Prostick
30.00
Custom SBC solid cam and lifters new
252/264 112 .600 with 1.7 and .591 with 1.6 exh
matched cool face lifters that are specially made to oil the cam face with a tiny hole in the face of the lifter this are expensive but the only have to fly with a big lift solid. Installed but never fired
$250.00
aluminum firewall cover
came from a member of Malibu racing that was making these a few years ago $20.00 SOLD
Product Engineering vacuum pump
Very slightly used and also have the mandrel for SBC not shown
$300.00 SOLD
MSD pro billet slip collar distributor
used but in great shape. Has the adjustble collar to fit exact to your block
$180.00
New Autometer Nitrous gauge
60.00
New holley regulator
like what come in the blue pumps
18.00
new Autometer fuel pressure regulator with isolator
$100.00
MSD Digital 6plus
very slighty used
$240.00
lightly used condition with cover
set up for 3 speed $135.00
new 2 speed gate plate for Prostick
30.00
Custom SBC solid cam and lifters new
252/264 112 .600 with 1.7 and .591 with 1.6 exh
matched cool face lifters that are specially made to oil the cam face with a tiny hole in the face of the lifter this are expensive but the only have to fly with a big lift solid. Installed but never fired
$250.00
aluminum firewall cover
came from a member of Malibu racing that was making these a few years ago $20.00 SOLD
Product Engineering vacuum pump
Very slightly used and also have the mandrel for SBC not shown
$300.00 SOLD
MSD pro billet slip collar distributor
used but in great shape. Has the adjustble collar to fit exact to your block
$180.00
New Autometer Nitrous gauge
60.00
New holley regulator
like what come in the blue pumps
18.00
new Autometer fuel pressure regulator with isolator
$100.00
MSD Digital 6plus
very slighty used
$240.00
Last edited by gearheads78; 02-27-2008 at 03:53 PM.
Trending Topics
03-06-2008, 10:13 AM
#9
TECH Enthusiast
Thread Starter
iTrader: (29)
Join Date: Aug 2003
Location: Dallas TX
Posts: 662
Likes: 0
Received 0 Likes
on
0 Posts
I am ready to get rid of the rest of my stuff. I posted several items on EBAY for next to nothing compared to value. No reserves on any of it. I will be posting more when I get the chance.
For the record the Honda part was not mine. I took it in trade for some other parts.
http://motors.search.ebay.com/_W0QQsassZgearheads78
For the record the Honda part was not mine. I took it in trade for some other parts.
http://motors.search.ebay.com/_W0QQsassZgearheads78
