1969 Chevelle SS body
04-16-2008, 10:07 AM
#1
1969 Chevelle SS body I have pictures below. This car would make a good LSX candidate!
69 Chevelle SS 4spd BB car-body and glass very good-car was stored since 1979 in garage
powder coated frame-boxed and modified
Global West tubular lca
Full Hotchkiss suspension, tubular uppers, springs, etc...
QA1 12 way adjustables all the way around
Baer 13" Track 1 kit front/back
In-line Tube stainless lines front/back
All bumper brackets, hood hinges, etc... powder coated
Master A&M Softseal rubber kit
Flow Restoration wiskers
Moser 12 bolt-33 spline, 1350 moly yoke, 800lb. springs, 3.73 Strange gears,
heat treated gears, Timken bearings, National seals
Billet Specialties-GTX-01 17"X10"rears--17"X8"fronts
Nitto 455 rubber-275X17"--295X17"
New front/back bumpers w/hardware
Original chrome + new chrome. Some GM, some PUI, Trim Parts, stainless,etc...
Harwood 4" Outlaw bolt on cowl hood w/lightweight springs
All new lights, bezels, trim rings,head light springs,etc...
Detroit Speed & Engineering 12.7-1 power steering box, coated, w/Pro Choice
3500psi braided line and special AN fittings
New in boxes GM front fenders and full quarters
New Dynacorn doors and trunk
Detroit Speed & Engineering wiper motor
Much more.
Have other high quality new in box parts that can go for more $ or as a full package. 540" Shafiroff-turbo 400-PST 3" aluminum drive shaft w/1350 joints
Griffin radiator w/ 2-1 1/4" rows-good for 1000HP
Ididit carbon fiber steering column, tilt
Billet Specialties matching steering wheel to GTX01 w/carbon fiber wrap
John Covan carbon fiber dash
had strato buckets-missing seats, have original door panels
Complete Aeromotive fuel system, w/billet speed controler
Flowtech 3.5" mandrel bent exhaust-complete w/all stainless Torctite bandclamps
Spintech 4"-3.5" reducers-14" long
MSD-7AL2 w/crank trigger complete ignition system
Dave Lemmon 2 1/8"-2 1/4" stepped hedders-4" collector-inside wheelwell-tucked to floor-coated
So much more---
$35,000.00 everything-over $70,000.00 invested. Was building for dad for Woodward Cruise. Passed away. Don't want to look at car.
877-866-9336-m-f--9:00-6:00,Brian
If only body without 540 and related parts, $25,000.00, possibly can deliver or meet 1/2 way. Add it up, this is a STEEL!!
69 Chevelle SS 4spd BB car-body and glass very good-car was stored since 1979 in garage
powder coated frame-boxed and modified
Global West tubular lca
Full Hotchkiss suspension, tubular uppers, springs, etc...
QA1 12 way adjustables all the way around
Baer 13" Track 1 kit front/back
In-line Tube stainless lines front/back
All bumper brackets, hood hinges, etc... powder coated
Master A&M Softseal rubber kit
Flow Restoration wiskers
Moser 12 bolt-33 spline, 1350 moly yoke, 800lb. springs, 3.73 Strange gears,
heat treated gears, Timken bearings, National seals
Billet Specialties-GTX-01 17"X10"rears--17"X8"fronts
Nitto 455 rubber-275X17"--295X17"
New front/back bumpers w/hardware
Original chrome + new chrome. Some GM, some PUI, Trim Parts, stainless,etc...
Harwood 4" Outlaw bolt on cowl hood w/lightweight springs
All new lights, bezels, trim rings,head light springs,etc...
Detroit Speed & Engineering 12.7-1 power steering box, coated, w/Pro Choice
3500psi braided line and special AN fittings
New in boxes GM front fenders and full quarters
New Dynacorn doors and trunk
Detroit Speed & Engineering wiper motor
Much more.
Have other high quality new in box parts that can go for more $ or as a full package. 540" Shafiroff-turbo 400-PST 3" aluminum drive shaft w/1350 joints
Griffin radiator w/ 2-1 1/4" rows-good for 1000HP
Ididit carbon fiber steering column, tilt
Billet Specialties matching steering wheel to GTX01 w/carbon fiber wrap
John Covan carbon fiber dash
had strato buckets-missing seats, have original door panels
Complete Aeromotive fuel system, w/billet speed controler
Flowtech 3.5" mandrel bent exhaust-complete w/all stainless Torctite bandclamps
Spintech 4"-3.5" reducers-14" long
MSD-7AL2 w/crank trigger complete ignition system
Dave Lemmon 2 1/8"-2 1/4" stepped hedders-4" collector-inside wheelwell-tucked to floor-coated
So much more---
$35,000.00 everything-over $70,000.00 invested. Was building for dad for Woodward Cruise. Passed away. Don't want to look at car.
877-866-9336-m-f--9:00-6:00,Brian
If only body without 540 and related parts, $25,000.00, possibly can deliver or meet 1/2 way. Add it up, this is a STEEL!!
Last edited by 382ssz28; 05-07-2008 at 05:23 PM. Reason: Add Pictures
04-17-2008, 09:57 AM
#4
TECH Enthusiast
iTrader: (7)
Join Date: Apr 2005
Location: Birmingham, Alabama
Posts: 585
Likes: 0
Received 0 Likes
on
0 Posts
Can you send me some pics to David.Robinson.30@us.af.mil please. Sorry to hear about your dad, I know the feeling.
Doc
Doc
69 Chevelle pics 