Moving on to bigger and better setup. So Im selling my old setup here.
This setup ran a best of 7.28 N/A at 94.1 MPH with a turbo 350 and 7.8 N/A with a 6-speed and 7.48 on a 50 shot.


part out prices added.. prices are for the part only. or you can buy all for 2400+shipping and PP fees

What you get
58 MM BBk TB $200
30LB accel injectors $250
Fuel rails and adj. fuel regulator $80
All part below came from Flowtenics in WA.
LT4 intake port matched for heads and TB. Intake has had some port work don to it. $400
Custon grind hydro roller cam, lifter and harded pushrods used with cam spec below $350
Intake 236@.050; 344 lobe rise w/1.6 r.r. .550 Lift
Exhuast 245@.050; .358 lobe risew/1.6 r.r. 573 Lift
LT4 heads that have been ported and polshed $1500
Specs are
2.02 intake and 1.60 exhuast vavle
59cc; bronze guides, hardened spring pads and valve gudies plates

Flow numbers are
Lift Intake Exhuast
.300 192 162
.400 225 187
.500 259 203
.550 276 208
.600 283 213

I have over 4 grand in this setup.... 1st 2400 takes the complete setup. The heads and cam are still on the car till new setup get here or I will pull them when sold

I will give the person that buys it a copy of the tune.

I will throw in LT1 edit for 300.

If you have any questions my number is 325-864-1653

 

dont want to part out right now... will reconsider in a week..

 

part out prices added

 

any pics of the rails and regulator

 

e-mail addy..

 

bump..

 

will start pulling parts next week..

 

parts ready to be pulled..

 

bump..

 

bump...

 

What kinda hp did your car make with this setup without the nitrous?

 

425 at the rear on a dyno jet at nitro daves

 

bump..

 

still got all parts

 

still got all parts here...

 

bump...

 

bump..

 

can I get pic's and info of the TB to bryce.barton@gmail.com
Thanks

 

will do...

 

pics sent..