FS: 355 Nitrous Shortblock, LS1 Lid Conversion, LS1 driveshaft, WP, LT4 Starter
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
355 Nitrous Shortblock, LS1 Lid Conversion, LS1 driveshaft, WP, LT4 Starter
Pictures - http://picasaweb.google.com/snvent/L...ey=7T-fAe4v3-0
Strut Tower Brace "STB" - $40 SOLD
It is painted baby blue and is off a car I parted. Some spray paint would go a long way. Can't tell the brand because of the paint.
LS1 Lid Conversion Kit for LT1 - $130
Includes lid, radiator support, KN drop in filter, smooth bellows for connecting MAF to TB. Should be worth a couple of tenths on a built motor. This setup won't work with a stock hood. Requires some sort of cowl or raised hood. A complete list of hoods is availabe on Ls1tech.com.
![](https://lh4.ggpht.com/snvent/SEHstuCsuZI/AAAAAAAAAsU/mrSAGlTv7F0/DSC00268.JPG?imgmax=640)
LT1 Steam Pipe/Vent Tube - $10
LT1 Dog Bones/Spider - $10
Digital WOT Switch - $25
Bought it from Dynotune and removed it for an FJO controller. Works great. Detects TPS and sends power to a relay at desired TPS level.
![](https://lh6.ggpht.com/snvent/SB4OiQLuqjI/AAAAAAAAAbk/Cm2wd01Q4Vg/DSC00139.JPG?imgmax=640)
All parts are PLUS shipping. If the part is over $100 please add 3% for Paypal fees. I will accept money orders but they have to clear before I will ship. All prices are OBO. You can PM me or email me at snvent(at)gmail.com
Pictures - http://picasaweb.google.com/snvent/L...ey=7T-fAe4v3-0
Strut Tower Brace "STB" - $40 SOLD
It is painted baby blue and is off a car I parted. Some spray paint would go a long way. Can't tell the brand because of the paint.
LS1 Lid Conversion Kit for LT1 - $130
Includes lid, radiator support, KN drop in filter, smooth bellows for connecting MAF to TB. Should be worth a couple of tenths on a built motor. This setup won't work with a stock hood. Requires some sort of cowl or raised hood. A complete list of hoods is availabe on Ls1tech.com.
LT1 Steam Pipe/Vent Tube - $10
LT1 Dog Bones/Spider - $10
Digital WOT Switch - $25
Bought it from Dynotune and removed it for an FJO controller. Works great. Detects TPS and sends power to a relay at desired TPS level.
All parts are PLUS shipping. If the part is over $100 please add 3% for Paypal fees. I will accept money orders but they have to clear before I will ship. All prices are OBO. You can PM me or email me at snvent(at)gmail.com
Last edited by Tireburnin; 06-26-2008 at 02:05 PM.
#4
12 Second Club
iTrader: (10)
Join Date: Nov 2007
Location: Tucson, AZ
Posts: 1,094
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I would like to know more about the TPS switch and I am def interested in the Lid kit. Most likely do a package deal with you on that if we could. I just want to know what the switch does and how it mates with the stock wiring.
#5
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The TPS switch eliminates a mechanical WOT switch that would have to install near your throttle body under the hood. Basicly you connect the white wire on the box to a digial TPS signal under your dash (also a white wire). Give the box power and ground, then when the box sees whatever voltage TPS you have it set to (4-5volts) it will send power through the yellow wire which is usually connected to a nitrous relay and thus activating your nitrous kit.
It helps keep your engine bay clean of wires and swithces.
Send me a PM with what you were thinking for a package deal. We can work something out.
It helps keep your engine bay clean of wires and swithces.
Send me a PM with what you were thinking for a package deal. We can work something out.