Lt1/SBC parts, LTx HotCam Setup, BOV's, MSD BTM ect
09-24-2008, 11:08 AM
#1
11 Second Club
Thread Starter
iTrader: (1)
Join Date: Apr 2006
Location: Corydon, In
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Lt1/SBC parts, LTx HotCam Setup, BOV's, MSD BTM ect I've got a complete LT4 Hotcam setup for a LT1 car. Brand New. Everything is still in the boxes.
Cam is a 218/228 - 525/525 on a 112 Hydraulic Roller
Brand New 1.6 Roller Rockers.
Upgraded Valve Springs, New in box
Also comes with all the valve caps, valve keys, and valve spring shims. This fits all 92-97 LT1/LT4 engines.
Asking 500.00 This package sells for almost 600 dollars and makes great power (325-350whp depending on the mods).
Sealed Power High Volume Oil Pump. New in the Box. Never even been opened.
Asking $40.00
350 Small Block - LT1 Bottom End rebuild parts as follows:
Forged Sealed Power 0.30 Over 350/LT1 Piston Set. Brand New in the box.
Sealed Power piston rings
Federal Mogul Main, Cam and Rod Bearings
Brass Freeze Plugs, Plastigage, and assembly lube
With stock LT1 heads these will put you at around 10.4:1 compression. I also have a felpro engine gasket set, minus the intake gaskets.
Asking 450.00. This is DIRT CHEAP for everthing you are getting. Sells for around 600 in summit.
Eagle H-Beam Rods for 350/LT1 engines. Brand New in the box
Asking 300.00
I also have another set of 350/LT1 pistons that I will list tomorrow. Want to double checks some stuff on them but they are Speed-Pro 0.30 over Forged.
More to come. All prices are OBO
Post, PM, Call, or email
Charles
502 589 1155 - work
502 472 8747 - cell
Charles@automotionky.com - email
MORE BELOW!!!
Cam is a 218/228 - 525/525 on a 112 Hydraulic Roller
Brand New 1.6 Roller Rockers.
Upgraded Valve Springs, New in box
Also comes with all the valve caps, valve keys, and valve spring shims. This fits all 92-97 LT1/LT4 engines.
Asking 500.00 This package sells for almost 600 dollars and makes great power (325-350whp depending on the mods).
Sealed Power High Volume Oil Pump. New in the Box. Never even been opened.
Asking $40.00
350 Small Block - LT1 Bottom End rebuild parts as follows:
Forged Sealed Power 0.30 Over 350/LT1 Piston Set. Brand New in the box.
Sealed Power piston rings
Federal Mogul Main, Cam and Rod Bearings
Brass Freeze Plugs, Plastigage, and assembly lube
With stock LT1 heads these will put you at around 10.4:1 compression. I also have a felpro engine gasket set, minus the intake gaskets.
Asking 450.00. This is DIRT CHEAP for everthing you are getting. Sells for around 600 in summit.
Eagle H-Beam Rods for 350/LT1 engines. Brand New in the box
Asking 300.00
I also have another set of 350/LT1 pistons that I will list tomorrow. Want to double checks some stuff on them but they are Speed-Pro 0.30 over Forged.
More to come. All prices are OBO
Post, PM, Call, or email
Charles
502 589 1155 - work
502 472 8747 - cell
Charles@automotionky.com - email
MORE BELOW!!!
09-24-2008, 11:09 AM
#2
11 Second Club
Thread Starter
iTrader: (1)
Join Date: Apr 2006
Location: Corydon, In
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Used MSD BTM
This is the universal one for forced induction cars. It does everything a standard 6al will do an dhas the ability to reduce timing 1-3 degrees per pound of boost. Worked great.
Asking 100.00 Sells for 222.00 new in summit.
Used Edelbrock mid-length Headers for LT1 with y-pipe. These are in good shape and have some sort of coating on them. Y-pipe has a little rust, but is othewise in good shape and would clean up just fine.
Asking 65.00
New in Box Polished Tial 50mm BOV with mild steel weld flange.
Asking 175.00
New in Box HKS SSQV BOV
SOLD!
Charles
This is the universal one for forced induction cars. It does everything a standard 6al will do an dhas the ability to reduce timing 1-3 degrees per pound of boost. Worked great.
Asking 100.00 Sells for 222.00 new in summit.
Used Edelbrock mid-length Headers for LT1 with y-pipe. These are in good shape and have some sort of coating on them. Y-pipe has a little rust, but is othewise in good shape and would clean up just fine.
Asking 65.00
New in Box Polished Tial 50mm BOV with mild steel weld flange.
Asking 175.00
New in Box HKS SSQV BOV
SOLD!
Charles
Last edited by The Reapar; 09-25-2008 at 12:08 PM.
Trending Topics
04-26-2009, 03:11 PM
#14
Teching In
Join Date: Apr 2009
Location: Washington State
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Hi, I'm very interested on the MSD BTM. My question is: Do you have all the cables and stuff that came with it??Is it in working condition? and how much shipped to 99344?
Thank you
Thank you
