dynoed today! numbers inside
#1
Thread Starter
TECH Apprentice
iTrader: (6)
Joined: Oct 2007
Posts: 371
Likes: 0
From: Newberg Oregon
dynoed today! numbers inside
I took my 01ws6 down to tommy's shop today and had it tuned, That guy know's what he is doing thats for sure. I bought a 408 from chris and finally got it installed and I used a ms4 with stage 1 243's and ls6 intake and ran it through my stock 10 bolt and put down 470 hp and about 445 ft lbs. I was impressed I ran out of injector right after it peaked.
Im happy with it for now, Thanks guys for you're help.
Brandon
Im happy with it for now, Thanks guys for you're help.
Brandon
Trending Topics
#9
Nice numbers Brandon!! Tom is great guy to deal with. If you go to PIR, let me know and I'll try to make it out there to meet everyone.
Maybe we should start a separate thread for the PIR meet this Friday?
Mike
Maybe we should start a separate thread for the PIR meet this Friday?
Mike
#10
Brandon, just don't forget that you have a fuel issue on the top end, and that when you change out the injectors we will need to go back in and change the PCM so that it knows what size injectors you are running. It was good to meet you guys, take care and enjoy your car.
#11
Thread Starter
TECH Apprentice
iTrader: (6)
Joined: Oct 2007
Posts: 371
Likes: 0
From: Newberg Oregon
http://www.youtube.com/watch?v=P2ihJznCpFA
There is a video of the third run it's a little jerky but here it is
There is a video of the third run it's a little jerky but here it is