Orygun guys?
#9165
Looking for anyone who can help me with my wiring for my 70 Chevelle, LS1/4L60e. I had a company do the harness but wont start without bridging the starter. I live just outside portland, east side. PM me if you can help. text, PM or email, or even swing by. Let me know. I think it has something to do with chevelle body harness. PM me for details.
#9169
TECH Regular
Join Date: Nov 2001
Location: Portland OR
Posts: 441
Likes: 0
Received 0 Likes
on
0 Posts
time for mods.
couldn't do much last night at PIR
best was 13.3@108. couldn't get lower than a 2.1 60'
wheel hop or spin, couldn't really get a good medium. need to get some 16"s or something for a launch. 19"s suck ***.
oh well. got my baseline runs done. Mod time begins
couldn't do much last night at PIR
best was 13.3@108. couldn't get lower than a 2.1 60'
wheel hop or spin, couldn't really get a good medium. need to get some 16"s or something for a launch. 19"s suck ***.
oh well. got my baseline runs done. Mod time begins
#9170
11 Second Club
iTrader: (37)
time for mods.
couldn't do much last night at PIR
best was 13.3@108. couldn't get lower than a 2.1 60'
wheel hop or spin, couldn't really get a good medium. need to get some 16"s or something for a launch. 19"s suck ***.
oh well. got my baseline runs done. Mod time begins
couldn't do much last night at PIR
best was 13.3@108. couldn't get lower than a 2.1 60'
wheel hop or spin, couldn't really get a good medium. need to get some 16"s or something for a launch. 19"s suck ***.
oh well. got my baseline runs done. Mod time begins
Mike
#9171
TECH Regular
iTrader: (2)
time for mods.
couldn't do much last night at PIR
best was 13.3@108. couldn't get lower than a 2.1 60'
wheel hop or spin, couldn't really get a good medium. need to get some 16"s or something for a launch. 19"s suck ***.
oh well. got my baseline runs done. Mod time begins
couldn't do much last night at PIR
best was 13.3@108. couldn't get lower than a 2.1 60'
wheel hop or spin, couldn't really get a good medium. need to get some 16"s or something for a launch. 19"s suck ***.
oh well. got my baseline runs done. Mod time begins
Good job man
#9172
TECH Regular
Join Date: Nov 2001
Location: Portland OR
Posts: 441
Likes: 0
Received 0 Likes
on
0 Posts
and the IRS feels the same as the GTO, but i don't remember having as bad wheel hop with it. could pull 1.9 60s in my GTO at woodburn
my brakes were faded on my last run, so i guess those are on my list too
#9173
12 Second Club
iTrader: (13)
time for mods.
couldn't do much last night at PIR
best was 13.3@108. couldn't get lower than a 2.1 60'
wheel hop or spin, couldn't really get a good medium. need to get some 16"s or something for a launch. 19"s suck ***.
oh well. got my baseline runs done. Mod time begins
couldn't do much last night at PIR
best was 13.3@108. couldn't get lower than a 2.1 60'
wheel hop or spin, couldn't really get a good medium. need to get some 16"s or something for a launch. 19"s suck ***.
oh well. got my baseline runs done. Mod time begins
#9176
TECH Regular
Finally some good news on my LS swap!
I have heads and an intake that actually fit together
Still needs a few (probably more like a ton) things and I'll have to go through the bottom end of the engine but I had to set it kind of together to give me some hope.
They're LS3 Heads and a stock intake
Jessica
I have heads and an intake that actually fit together
Still needs a few (probably more like a ton) things and I'll have to go through the bottom end of the engine but I had to set it kind of together to give me some hope.
They're LS3 Heads and a stock intake
Jessica
#9177
12 Second Club
iTrader: (13)
Finally some good news on my LS swap!
I have heads and an intake that actually fit together
Still needs a few (probably more like a ton) things and I'll have to go through the bottom end of the engine but I had to set it kind of together to give me some hope.
They're LS3 Heads and a stock intake
Jessica
I have heads and an intake that actually fit together
Still needs a few (probably more like a ton) things and I'll have to go through the bottom end of the engine but I had to set it kind of together to give me some hope.
They're LS3 Heads and a stock intake
Jessica
#9178
TECH Regular
I still have to figure out all the accessories and small stuff for the engine and the fuel system on the car...I have a ton left to figure out but at least its getting closer and things are definitely on the back burner so I can keep collecting parts.
Jessica
#9179
11 Second Club
iTrader: (37)
No cam yet, so no specs. The heads are 823 castings with new PRC .675 spings and Ti retainers. I got them with all the rockers, pedestals, and TSP 7.4 pushrods.
I still have to figure out all the accessories and small stuff for the engine and the fuel system on the car...I have a ton left to figure out but at least its getting closer and things are definitely on the back burner so I can keep collecting parts.
Jessica
I still have to figure out all the accessories and small stuff for the engine and the fuel system on the car...I have a ton left to figure out but at least its getting closer and things are definitely on the back burner so I can keep collecting parts.
Jessica
Mike