Getting my car tuned this friday
01-13-2011, 12:45 AM
#21
TECH Enthusiast
iTrader: (4)
Join Date: Aug 2009
Location: longview, wa
Posts: 651
Likes: 0
Received 0 Likes
on
0 Posts
Well I also have 2.5 in true duals dumped with x pipe. And slp lid, smooth bellows, slp cai( so yes the bottom is cut out. Havnt descreened the maf. I really thought I would get at least 450 rw on toms dyno but nope I was dead wrong. I blame the heads
01-13-2011, 12:47 AM
#22
TECH Enthusiast
iTrader: (4)
Join Date: Aug 2009
Location: longview, wa
Posts: 651
Likes: 0
Received 0 Likes
on
0 Posts
I'm really rather wanting to do a new motor instead of putting anymore money into the ls1. I like the 414 ci ls2 pretty reasonable price and could make a ton of power. But I'm gonna have to get back to work before I even think of spending 10k on a motor
01-13-2011, 01:05 AM
#23
Teching In
Thread Starter
iTrader: (4)
Join Date: Jul 2009
Location: Brush prairie,wa
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Yeah that would be nice but ii would go get it dynoed on a dyno jet to see if it makes power like texas speed says that combo makes. And did those heads get milled any or are they stock??? But even with the 426 whp Your trap should be at least 117 to 120. Have you ever scaled your car??
01-13-2011, 01:15 AM
#24
TECH Enthusiast
iTrader: (4)
Join Date: Aug 2009
Location: longview, wa
Posts: 651
Likes: 0
Received 0 Likes
on
0 Posts
I would like to get it dynod on the same dyno that I did my bolt on pulls. That would give me the true number. The heads are unmilled. But tsp said I gained some compression with the 243s. I was expecting 100 hp after the h/c but according to the difference between the dynojet and the mustang dyno I only gained 80 hp. I was expecting a lot more goin with a big cam and those heads. My car weighs 3400 lbs without me in it
01-13-2011, 01:39 AM
#25
Teching In
Thread Starter
iTrader: (4)
Join Date: Jul 2009
Location: Brush prairie,wa
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
I would like to get it dynod on the same dyno that I did my bolt on pulls. That would give me the true number. The heads are unmilled. But tsp said I gained some compression with the 243s. I was expecting 100 hp after the h/c but according to the difference between the dynojet and the mustang dyno I only gained 80 hp. I was expecting a lot more goin with a big cam and those heads. My car weighs 3400 lbs without me in it
01-13-2011, 02:50 AM
#26
TECH Enthusiast
iTrader: (4)
Join Date: Aug 2009
Location: longview, wa
Posts: 651
Likes: 0
Received 0 Likes
on
0 Posts
I got it dynod at Rrev in jantzen beach. It made 341rw with out a tune when I had boltons. When I weighed the car I think I had a near empty tank and it may have been just a lil over 3400 maybe like...3420 or somethin
01-13-2011, 12:43 PM
#32
TECH Regular
iTrader: (3)
Join Date: Sep 2004
Location: Vancouver, Washington
Posts: 433
Likes: 0
Received 0 Likes
on
0 Posts
I think I only have Tim's shop number and I think your right that they are out of business. I know HUNW had a meeting this last Saturday, but I was at the NHRA Division 6 banquet and couldn't make it. I'm not sure where AFP is. I'll do some checking and get back to ya.
01-13-2011, 08:14 PM
#34
TECH Regular
iTrader: (3)
Join Date: Sep 2004
Location: Vancouver, Washington
Posts: 433
Likes: 0
Received 0 Likes
on
0 Posts
Mike - the old HUNW forum is dead. They started a new one. www.headsupnw.net
And yes AFP is on 65th St just off St. Johns here in Vancouver.
And yes AFP is on 65th St just off St. Johns here in Vancouver.
