Crisisman

iTrader: (1)

Edited to show final details!

Details:
Turbo Technologies Inc
6211 S. Adams Suite B
Tacoma, WA 98409
Saturday, March 17, 2007
9:00am until we're done.

Prices:
$30 hook-up and first pull
$10 each additional pull
$35 a/f reading

93TAWicked1

iTrader: (28)

Actually I'm thinking about taking my ride up there for some tranny work, is it bad to run a new clutch on a dyno?

Amorget

I'd like to know what my 88 TA is putting out before I get to the real mods.

howierd42

How about a Sunday instead?

KrautBurner

iTrader: (5)

I am,

but I'm probably looking for the end of this month or early feb.

gotta see what the cam/headers/and nitrous did.

00Vette

iTrader: (4)

I'll be up for it AFTER I get my car back from Ellis. He don't have it yet but should have it soon.

What are you projecting for a date, and have you talked to any of the dyno shops to see if they'd host one?

A dyno day would really help me make sure my A/F gauge is good and to see how much power I can make with out my A/F all fucked up.

Crisisman

iTrader: (1)

I'm scheduled with the Guru as well.

I don't see why he wouldn't let us do a Feb date if that's what people want. I just figured March would leave more time for people to get their set-ups working, plus with a little luck it'll have stopped snowing by March.

00Vette

iTrader: (4)

Late Feb to March works for me.

Rollin Black

iTrader: (34)

I would be interested in a March date also.

Thanks, Perry

sidewayz28

iTrader: (24)

ill def be interested... i would like to see what kinda numbers i made with the 243s & 90/90... and once the direct port is finished! hopefully itll be ready by the end of march

Crisisman

iTrader: (1)

I wouldn't think so. You aren't shifting hard on a dyno, just putting it to the metal once you are already firmly in gear.

jbacuh357

I need to get on the dyno with Ellis too!!! We were scheduled for this Sat the 20th up at Marysville Speed but the snow has ruined my plans once again. Damn it!!!

The sooner the better, just let me know and I will be there...

jewbacca

iTrader: (5)

How much does it cost? I'd really like to get a basline for my car. Plus I really wanna know what I am actually putting down.

Crisisman

iTrader: (1)

IIRC last year was $40 for hook-up and first pull. $10 each additional pull. $25 for a/f hookup. I just e-mailed George to verify what the prices will be this year. I'll post as soon as I get a reply.

jewbacca

iTrader: (5)

If that it what it ends up being, then count my in for sure. As long as its on the weekend, I should be able to make it.

98LS1Boy

a sunday would be better for me unless it was after 6:30 pm on a saturday doesnt matter what month though

Crisisman

iTrader: (1)

Hey all, I got the reply from George regarding the rates. Here it is:

"Pat,
Thanks for choosing our shop fro the dyno day. For car clubs or dyno days I price the base run at 30.00 and additional runs at 10.00 each. A/F can be used providing there is a bung installed before the dyno day.
I charge 35.00 for a/f rental. I have a tailpipe a/f too but its not very accurate if the car has converters and it hard on the 02 sensors so I don't care to use it if possible.

Thanks George"

Also, this is going to be a combined ls1tech ls1gto event. It looks like interest is high all around so I expect we'll have a good size group show.

KrautBurner

iTrader: (5)

I'm in (as long as it's a sat or sun not interfearing with the race sched)

Crisisman

iTrader: (1)

Ok, time to set a date. Turbo Tech does their dyno days on Saturday mornings starting at 9am. Let's hear your vote among the following options:

1. March 17th
2. March 24th
3. March 31st

I'll also post this on ls1gto. The date with the most votes will get booked.

93TAWicked1

iTrader: (28)

I'm down for March 31st that should be time to get my POS up and running right 9am means I'll have to leave at 6am to get there, where is Turbo tech in relation to Seattle?