C Murda

iTrader: (24)

dunno where exactly i should post this but im in need of a tubular front bumper support for the sole purpose of reinforcing my front muper so it doesnt sag or collapse under high speed winds... i want to remove my factory support to cut some weight but mainly make room for an intercooler.

BLULS1Z28

iTrader: (1)

i did one in the past all it was 2 90's and some straight tubes with some horzantal tubes going down and vetical pices connecting them and then i notched the foam out to fit. heres a quick scetch i did to sorta show what i did

Fast_94_Z

iTrader: (12)

talk to my buddies over at burkhart chassis. they have them ready to order. very very nice piece.

C Murda

iTrader: (24)

thanks ill look into burkhart...

Hot Copper Z

iTrader: (5)

Here is one that me and my two buddies made for my car. We made some extra to sale also. Here is the link.https://ls1tech.com/forums/drag-raci...r-support.html It weighs around 9lbs and is made out of chrome moly.

JGKadell

iTrader: (4)

I know a couple guys from the KC area made their own and they were really lightweight. Jerry goes by wlsmoku and has a purple 98 Z with a cowl hood.

here are his pics at the bottom of the first page
http://s124.photobucket.com/albums/p14/wlsmoku/camaro/

C Murda

iTrader: (24)

bought an burkhart front bumper support and it works and looks perfect! cleared A LOT of room in front to eventually fit a front mount and i think it looks a lot nicer now. prob just 5-10lbs lighter than the stock unit with styrofoam