Filling in the "CAMARO" on the berger panel.
06-06-2009, 07:28 AM
#1
On The Tree
Thread Starter
iTrader: (6)
Join Date: Sep 2008
Location: Somewhere down in Texas
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Filling in the "CAMARO" on the berger panel. I'm going to de-badge the car and I want to eliminate where it says "CAMARO" on the back of the car. I think I'm going to buy an extra berger panel so I can keep the car together until the panel is ready. Plus I don't want to mess up mine trying this. Has anyone done this? If so, what exactly did you use to fill it in? Is there a write-up on this somewhere?
I finally found a picture of a car with this done. Here is what I want:
http://www.gmhightechperformance.com.../photo_06.html
I finally found a picture of a car with this done. Here is what I want:
http://www.gmhightechperformance.com.../photo_06.html
06-07-2009, 08:05 AM
#3
10 Second Club
Join Date: Jun 2009
Location: se mich(pluto)
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
tals7 to fill in lettering you need 3m 2 part repair filler.cant rember part number i could check monday at work.have done this many times.any good shop can do this for just make sure they/you dont just fill letters with putty/bondo or the letters will come back.
