1996firebirdformula

iTrader: (3)

What should be done?

yodas little brother

iTrader: (2)

get it repainted.

KEE AUDIO

iTrader: (65)

Mine did the same thing in the same place but also did it on the door later. Got to have it sanded down and repainted. It will just keep getting worse and worse as more clear comes off.

Bad Blue WS6

iTrader: (41)

i had that happen on my front pass side of my TA, Green Chevy in Peoria IL did an awesome job fixing it for me for about 100 bux.

Bad Blue WS6

iTrader: (41)

,,,, cool avatar by the way.

mlr

that sucks

mlr

good old gm painting

Bad Blue WS6

iTrader: (41)

no doubt, nothing sux more than spraying your car at the car wash (whoa, whoa, whoa, whoa) and going, "what the hell is that!" as you watch the **** some flyin off like a mini skirt in a VIP box.

BlackScreaminMachine

iTrader: (17)

as much as it does suck getting it repainted, at least it looks black so there should be no blending issues.

JL-ws6's car had some issues AT the factory where they redid the quarter with heavy grit paper and it came through 4 years later but the clear was as smooth as ever but under certain lights it looks like someone hit it with a Brillo pad.

meaning, you never know what your going to get up there in Canada.

2002nbmssdd

I paint cars for a living. The quarter needs to be stripped of all the clear that is peeling. Don't let anyone tell u that it needs to be stripped to bare metal. It does'nt. It just needs to be taken down to the base underneath. also make sure that whoever fixes it does not just feather-edge the clear and then paint over it and make sure they use a sealer

transamws6_97

iTrader: (5)

same thing is happening to my hood so I'm just gonna go ahead and get my whole car done since itll prob happen in other places if I dont do it now

99Ls1fever

iTrader: (3)

That Sucks Man, your going to have to get her repainted

99TransAm666

iTrader: (6)

Same **** happend to mines. I repainted it. I would repaint the other quarter also just in case.