Comin' Thunder

iTrader: (5)

Hey guys, is the front fascia on a firehawk trans am identical to that of a WS.6 or sleek beak T/A? I believe the front fascia for all the Trans Am models are the same and the only difference is that the firehawk has the little press on Firehawk logo that got painted with the rest of the car. Is this correct? I'd just like to know in case I ever need to get the front of my car repaired or something, especially since SLP doesn't sell many '98-'02 Firehawk/SS parts anymore. Thanks.

vader99

iTrader: (4)

The firehawk front bumpers have some plastic shaved off around the top edge of the bumper so it properly lines up with the hood. Other than that, the bumpers for all the trans ams are the same.

95TAJade

iTrader: (4)

+1 vader99: the Firehawk's front fascia has about 2" trimmed out from the notrils/air inlets. All so it'll fit the hoods lower ram air intake provisions.

Comin' Thunder

iTrader: (5)

Thanks guys.

aarontracy

iTrader: (17)

we put a t/a bumper on my cousins firehawk, had to use a razor blade knife to trim the excess around the nostrils