My project
#45
Teching In
Thread Starter
Join Date: Mar 2011
Location: Bellingham,Massachusetts
Posts: 41
Received 0 Likes
on
0 Posts
Ok car is wet sanded,no more wet sanding......thank god.Next is give the car a good cleaning inside an out.After that the spoiler will get some attention,already scuffed it down an filled in small pit marks.This spoiler is gonna be a pain in the *** to paint,i gotta hang the spoiler by small chains so I can paint both sides....gonna be a project but whats new.
#46
TECH Regular
iTrader: (4)
Join Date: Apr 2010
Location: Bristol,TN
Posts: 472
Likes: 0
Received 0 Likes
on
0 Posts
Looks good,if u can get a wood saw horse u can also get some long rods with threads,u can screw the rods in the bottom of the spoiler,mark the space on the saw horse,drill holes in the saw horse 2-3 in. then u can paint the spoiler upright n get all around,lookin awsome though!
#48
Teching In
Thread Starter
Join Date: Mar 2011
Location: Bellingham,Massachusetts
Posts: 41
Received 0 Likes
on
0 Posts
Finished wet sanding car.... cleaned her up nice ..nice an ready for paint.As you can see the first owner must of used the rocker panel to jack the car up,thank god it doesn`t affect the factory ground effects.Called my uncle to make sure he can`t still paint it in his works spray booth,looks good.Getting ready to prime the rear spoiler.[IMG][/IMG]
#51
12 Second Club
iTrader: (10)
MORE PICS!!! and maby you could do a list of everything that you used.. the primer, the spray gun, the tips, the sandpaper, the tape everything so anybody wants to do the same can know what materials to start with...IMO it looks BAD ***!!!! damn fine work sir!!!
ps.. did you repair the sail panel as i know those have a habit of bubbling and peeling? there was just an issue in CAMARO PERFORMERS about 6LE designs and their targa top conversion because there are no aftermarket resources for the sail panel and those bubbling issues... best bet would be to contact 6LE on here and talk to him before you go too crazy with it.. just an idea.. and McNord does some bad as work as well!!!
ps.. did you repair the sail panel as i know those have a habit of bubbling and peeling? there was just an issue in CAMARO PERFORMERS about 6LE designs and their targa top conversion because there are no aftermarket resources for the sail panel and those bubbling issues... best bet would be to contact 6LE on here and talk to him before you go too crazy with it.. just an idea.. and McNord does some bad as work as well!!!
#59
TECH Fanatic