Plati Dip? WTF?
Thanks man, it took almost 4 to do the explorer.
As far as getting a clean line for the stripes, I've read that the trick is to spray a coat, wait a few seconds, spray another coat, etc. Do 3-5 wet coats, and when done with the last coat, carefully (slowly) pull the tape off while it is still wet. This prevents it from sticking to the tape and pulling away from the paint.
Last edited by ZexGX; Jul 11, 2011 at 02:10 PM.
As far as getting a clean line for the stripes, I've read that the trick is to spray a coat, wait a few seconds, spray another coat, etc. Do 3-5 wet coats, and when done with the last coat, carefully (slowly) pull the tape off while it is still wet. This prevents it from sticking to the tape and pulling away from the paint.
The Best V8 Stories One Small Block at Time
I remember plastic dipping my HPI Savage to take it mudding right after rain

to be honest it came out like crap, I got home and got eager to just start spraying so I went at it without any practice at all on anything else. I could have gotten it really smooth and even but you can see everywhere I started and stopped spraying and got lazy. but oh well! it looks better than silver how it was.

to be honest it came out like crap, I got home and got eager to just start spraying so I went at it without any practice at all on anything else. I could have gotten it really smooth and even but you can see everywhere I started and stopped spraying and got lazy. but oh well! it looks better than silver how it was.
So im going to pick up a can and see what i can do with it.. If and when i do. Ill post pics.





