i have an aftermarket ss wing and i dont have the light that came with it and i dont want to get another. i was wondering how hard it would be to cover that gap with fiberglass or if anyone has done this before? i have fiberglass stuff and this would be my first time using it . can anyone help me with this? i just want to get rid of the space where the light goes with fiberglass

 

anyone?

 

If that what you want to do that I would take it to a shop and let them do it. Have you done any fiberglass work before?

 

no if i would do it now this would be the first time. i have all the fiberglass supplies already from something i was gonna try before. just wondering how hard it would be to do

 

You need to practice on some spare stuff before hand. If you just lay fiberglass over that hole it is going to sink in and look like ****. With alittle practice it can be done. Its not hard just time consuming and be prepared to lay it down a few times until you get a feel for what your doing. I would even venture to say a body shop would be cheaper and faster in the long run but if your a do it yourself kind of person and have enough material have at it. P.S get a respierator and wear long sleeves etc.

 

Keep in mind all passenger cars after 1986 must be equipped with a high mount stop lamp per federal regs, which is what you're trying to delete here. Be prepared for some police hassle if you'll be driving on the street.