(Finished Pics posted from#247) 19x14s under flared quarters - my '02 Ram Air...
#63
On The Tree
iTrader: (1)
Join Date: Sep 2010
Location: DFW
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
id probably **** a brick if this thing pulled up next to me
really good work though. wish i had the skill to attempt something like this, but i think fitting a 12 under the rear of my car will be enough work for me
really good work though. wish i had the skill to attempt something like this, but i think fitting a 12 under the rear of my car will be enough work for me
#72
I know right?! Even more interesting, they could be considered 19x15's
"Actual Width" should be 'measured width'. So a 20x9 (measured width), is actually a 21x10. "Overall Width" is the actual wheel width. The measured width is from 'bead to bead', where the tire mounts to. The rim lip/flange is .5" thick around the entire wheel. This means if you are wanting a 20x11, you are actually getting a 21x12.
These are 14 inches wide from inner bead to inner bead. So in reality, they're literally 15 inches wide Couple of my faves. yes that's a coke can.
"Actual Width" should be 'measured width'. So a 20x9 (measured width), is actually a 21x10. "Overall Width" is the actual wheel width. The measured width is from 'bead to bead', where the tire mounts to. The rim lip/flange is .5" thick around the entire wheel. This means if you are wanting a 20x11, you are actually getting a 21x12.
These are 14 inches wide from inner bead to inner bead. So in reality, they're literally 15 inches wide Couple of my faves. yes that's a coke can.
Last edited by Austin Auflick; 01-20-2012 at 10:44 PM.
#73
TECH Fanatic
iTrader: (5)
I know right?! Even more interesting, they could be considered 19x15's
"Actual Width" should be 'measured width'. So a 20x9 (measured width), is actually a 21x10. "Overall Width" is the actual wheel width. The measured width is from 'bead to bead', where the tire mounts to. The rim lip/flange is .5" thick around the entire wheel. This means if you are wanting a 20x11, you are actually getting a 21x12.
Attachment 335916
These are 14 inches wide from inner bead to inner bead. So in reality, they're literally 15 inches wide Couple of my faves. yes that's a coke can.
Attachment 335918Attachment 335919
"Actual Width" should be 'measured width'. So a 20x9 (measured width), is actually a 21x10. "Overall Width" is the actual wheel width. The measured width is from 'bead to bead', where the tire mounts to. The rim lip/flange is .5" thick around the entire wheel. This means if you are wanting a 20x11, you are actually getting a 21x12.
Attachment 335916
These are 14 inches wide from inner bead to inner bead. So in reality, they're literally 15 inches wide Couple of my faves. yes that's a coke can.
Attachment 335918Attachment 335919
#77
Here is my autocross / street car I run a 16x12 rim witha 25x13 wide hoosier the flare was a universal i found on ebay. good luck with the prodject. for me the hardest part was radiusing a perfectly good quarters and fenders. The rims on my camaro are off the camaro you posted a pic of bought them last winter.
#78
TECH Enthusiast
iTrader: (9)
I was going to post the pictures of your car, but didn't want to do it without your permission. Glad you chimed in yourself first though.
http://farm7.static.flickr.com/6172/...9bf1e5b7_o.jpg
http://farm7.static.flickr.com/6159/...34577ef4_o.jpg
http://farm7.static.flickr.com/6172/...9bf1e5b7_o.jpg
http://farm7.static.flickr.com/6159/...34577ef4_o.jpg