Kandy Hellfire WS6 build thread
#381
On The Tree
Join Date: Jul 2008
Location: New troy, mi
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Do your initial clear for depth, then BLOCK it down with 600 grit, that will flatten the urethane peel.
With your flow coat you only need a few coats, you don't want excessive build as you will get urethane peel all over again.
A lot of guys will do their initial clearing, block the next day then only one coat for a flow coat, I would go 2 if it we're me, but just stating you don't need anymore than that for a flow coat.
#383
TECH Regular
Join Date: Dec 2005
Location: Kailua-Kona, HI
Posts: 444
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
A tip to this is to not go and go untill you run out of material, that is how you can get urethane peel..
Do your initial clear for depth, then BLOCK it down with 600 grit, that will flatten the urethane peel.
With your flow coat you only need a few coats, you don't want excessive build as you will get urethane peel all over again.
A lot of guys will do their initial clearing, block the next day then only one coat for a flow coat, I would go 2 if it we're me, but just stating you don't need anymore than that for a flow coat.
Do your initial clear for depth, then BLOCK it down with 600 grit, that will flatten the urethane peel.
With your flow coat you only need a few coats, you don't want excessive build as you will get urethane peel all over again.
A lot of guys will do their initial clearing, block the next day then only one coat for a flow coat, I would go 2 if it we're me, but just stating you don't need anymore than that for a flow coat.
Depends on the clear you are using and it's purpose.
I have used this UFC35 Flo-Clear on a bike and done 15 coats total 3 separate times- with no peel and no solvent popping. The reason for the build up is to flatten out the graphics.
I will be using a non-flo clear for the initial coats to get a higher build, sand w/600 then the graphics, then Flo clear about 5 coats (very thin), then sand w/1000, then 2-3 coats more Flo clear then color sand and buff.
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
#386
TECH Regular
Join Date: Dec 2005
Location: Kailua-Kona, HI
Posts: 444
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
#394
On The Tree
iTrader: (2)
Join Date: May 2007
Location: Lake Mary, Fl
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Saw this car in person too and it's so amazing to look at....just realized this was the thread about it...
Such a badass color....don't want to even think about what it would cost an average joe to have this done to his car lol...Great Work once again from the Whistler-Man...
Such a badass color....don't want to even think about what it would cost an average joe to have this done to his car lol...Great Work once again from the Whistler-Man...