Project: Mystic Z
#61
good news fellers, i didnt get jack **** done on the car this weekend. the 2 foot of snow we got kept me in the house all weekend and i couldnt get up to the car. but next week, im going to get the lid sitiuation figured out, make sure there are no more air pockets in the cooling system and get the e-fans working again. the it will get inspected and the week after that i am on spring break, so the motor is coming out and getting rebuilt.
#65
no, im going to myrtle beach this weeked, but next tuesday im off from school and work for 2 weeks, so i will hopefully be atleast be getting the motor pulled, rebuilt and back in. and wait a few weeks to paint it till it gets a little warm. God knows i can use a hand pulling the motor Eric. if you get a free afternoon i would really appreciate it.
#66
11 Second Club
iTrader: (11)
Join Date: Aug 2005
Location: plano
Posts: 1,039
Likes: 0
Received 0 Likes
on
0 Posts
good news fellers, i didnt get jack **** done on the car this weekend. the 2 foot of snow we got kept me in the house all weekend and i couldnt get up to the car. but next week, im going to get the lid sitiuation figured out, make sure there are no more air pockets in the cooling system and get the e-fans working again. the it will get inspected and the week after that i am on spring break, so the motor is coming out and getting rebuilt.
u lazy bumm... shows ur lack of dedication... jk yea it snowed here too.. then the next day it was like 70 uhhhh TEXAS i tell ya lol keep up the good work
#67
Registered User
Join Date: Feb 2008
Location: Seattle Wa
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Wow, good luck man. You got quite a project on your hands... I know what its like to have sentimental value, I will be throwing a stupid amount of $ into my 89' Formula one of these days...
#74
TECH Senior Member
iTrader: (11)
Hmm not bad... I suppose it might be possible to swap my motor in a weekend then... But who knows, stuff was stuck so hard when I had the shop fixing LCA bushings that they had to melt bolts off the car... Dunno if I want to get into anything like that.
Thanks for the info, and sorry for the
Thanks for the info, and sorry for the
#78
i strongly reccomend getting this bookhttp://http://store.summitracing.com...5&autoview=sku