FS: Reactor Alum. Flexplate, NIB LS2 SLP/N-Motion Double roller timing set
12-07-2009, 07:14 PM
#1
TECH Resident
Thread Starter
iTrader: (46)
Join Date: Dec 2001
Location: Some where in the Corn Fields of Illinois
Posts: 821
Likes: 0
Received 0 Likes
on
0 Posts
FS: Reactor Alum. Flexplate, NIB LS2 SLP/N-Motion Double roller timing set Up for sale are a couple of spare items I've got sitting around.
The timing chain was used just for initial mockup, but kept around as a spare. New in box, came from SLP Performance. This is also the same as the Rollmaster or the N-Motion timing sets. This is the double roller, billet cam gear, billet and hardened crank gear, Rolon double roller chain, and the required spacers and such. These normally go for around $145 or so.
Asking $85 plus the ride
Next is a spare, Reactor aluminum flexplate that I kept in the trailer. The SFI "decal" came off, but it has the certification date engraved into it by Reactor. This flexplate is not expired. This flexplate will bolt up to ANY LS series engine, and will allow a multitude of different converter bolt patterns.
New these go for almost $300.
Asking $170 plus the ride.
Pictures of the above items.
The timing chain was used just for initial mockup, but kept around as a spare. New in box, came from SLP Performance. This is also the same as the Rollmaster or the N-Motion timing sets. This is the double roller, billet cam gear, billet and hardened crank gear, Rolon double roller chain, and the required spacers and such. These normally go for around $145 or so.
Asking $85 plus the ride
Next is a spare, Reactor aluminum flexplate that I kept in the trailer. The SFI "decal" came off, but it has the certification date engraved into it by Reactor. This flexplate is not expired. This flexplate will bolt up to ANY LS series engine, and will allow a multitude of different converter bolt patterns.
New these go for almost $300.
Asking $170 plus the ride.
Pictures of the above items.
Last edited by SMKN TA 95; 12-14-2009 at 08:36 PM.
