Custom Ground Cam, made 463 rwhp
#1
Custom Ground Cam, made 463 rwhp
I am selling my cam from my car, it is a custom ground that was designed for the stock short block and my heads, I have the PRC stage 2.5 5.3 heads milled to 59 ccs, I am building my engine to a 383 and since I am going with aftermarket pistons I am going to a bigger cam. There is nothing wrong with this cam it is in perfect condition , I spun a rod bearing that is why the engine is down. This cam has less than 3k miles on it. I am wanting 260.00 paypal shipped to your door, I paid 450.00 so that is a fair price. This cam made 436 RWHP and 428 ft. lbs of torque with my heads and a stock shortblock.
cam specs out at .610-.608 gross lift
224-236 duration at .050
114+4
I have the complete cam card for the buyer. Like I said the cam is perfect, I am just going with a bigger cam now that I have the clearance..
I have bought and sold numerous things on this site, and have perfect rating, I am on ebay under the same username RARON455 and have well over 200 transactions with perfect feedback so you will have no worries.
If you want it please PM me for my paypal address.
cam specs out at .610-.608 gross lift
224-236 duration at .050
114+4
I have the complete cam card for the buyer. Like I said the cam is perfect, I am just going with a bigger cam now that I have the clearance..
I have bought and sold numerous things on this site, and have perfect rating, I am on ebay under the same username RARON455 and have well over 200 transactions with perfect feedback so you will have no worries.
If you want it please PM me for my paypal address.
Last edited by RARON455; 01-04-2010 at 05:59 AM.