VA Speed 410ci FI Long Block
#1
VA Speed 410ci FI Long Block
Category: Engine - Complete Motors
Price: $6800
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V
Location (State): VA
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS1/LS6
Up for sale is my Virginia Speed 410ci Long Block Built for FI.
Shawn at Virginia Speed is finishing up this long block for me.
Im am selling this motor because i dont have a need for a low compression motor anymore since I sold my TA.
Shawns building this motor to handle 1200HP.
The Long Block consists of the following parts.
410 cubes. 9.5:1 Compression.
6.0 iron block
Eagle forged 4.0 stroke crank
Eagle 6.125 H beam rods L19 Rod Bolts
JE Custom 4.04" forged pistons and rings
Pistons Coated. Ceramic on top and skirts.
clevite h series rod and main bearings
arp main studs
arp 12 point head studs.
ATI Damper pulley spaced for 3/8 motor plates.
World Warhawk LSx Heads 2.08, 1.60 Valves. 72cc chambers. 1.550" springs.
Fulling balanced, CNCed and Assembled by Shawn @ Virginia Speed.
**Updates parts added**
Cam (Call Shawn @ VA Speed to Spec)
lifters Lunati
timing chain
melling oil pump.
pushrods
head gaskets MLS
Hydraulic valve spring's 1.290"
Front and rear covers.
Valley cover.
Fully complete for $6800 + Shipping.
Shoot me a PM for more info.
This motor is still at Virginia Speed and shipping is not included.
Thanks
Kyle
Last edited by NA$TY-TA; 02-13-2010 at 09:49 AM.
#4
What happened?? Same and most. Wife lost her job. My wife had my son. Priorities changed. Car sat for a yr with a motor that needed rebuilding. decided to go bigger. After throwing $500 a month at it and getting nowhere it did nothing but upset me watching it sit.
So sold it as a roller, with the turbo kit. Same guy bought everything except the motor. So here i have a low compression 410ci motor with a non Forced induction setup. Ill build another one one of these days. Its not like i dont know how LOL.
Thanks for looking and make an offer.
Kyle
#8
Wow!! That's a killer deal. And we all know if it's built by Shawn at V.S. then you're getting a well built motor. Nasty good luck with the family. Man you gave up your car to take care of them and that's admirable. You will always have the opportunity to build another car latter when things pickup. Just remember good things happen to good people....
-Dave
-Dave
#12
Speaking of bikes i could use a Harley LOL J/K
I updating the thread.
Lower price and adding that it can be a complete motor including the following.
Cam (Call Shawn @ VA Speed to Spec)
lifters Lunati
timing chain
melling oil pump.
pushrods
head gaskets MLS
Hydraulic valve spring's 1.290"
Fully complete for $6800 + Shipping.
Shoot me a PM for more info.
Thanks
Kyle
I updating the thread.
Lower price and adding that it can be a complete motor including the following.
Cam (Call Shawn @ VA Speed to Spec)
lifters Lunati
timing chain
melling oil pump.
pushrods
head gaskets MLS
Hydraulic valve spring's 1.290"
Fully complete for $6800 + Shipping.
Shoot me a PM for more info.
Thanks
Kyle
#13
Teching In
iTrader: (6)
Join Date: May 2007
Location: Peshtigo, WI
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
I am interested in your motor. I am running a procharger and blew mine up. Your motor would work well for me; however, it is a bit out of my price range. PM me if you are willing to work somthing out.