2002 M6 Z28 12bolt PARTOUT
#83
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
All front accessories and brackets were sold early on, and I failed to list them or mark them sold as they werent listed to begin with. Just wanted to clear that up. Sorry about the confusion nos13.
**EDIT** I cut up the entire car and left no bolt unturned, or part not separated prior to hauling it off in tiny sawzall'd pieces. I'll make a list and update the thread as to what all is left.
SOME of what's left includes:
Front loaded calipers
Front rotors
Front spindles
Front STOCK struts and springs
6-Spd pedal assembly
hood release cable
throttle cable
cruise cable
ALL WEATHER STRIPPING, hatch rubber, door and NO LEAK T-top rubber
Wiper motor assembly and arms
Cowl panel
hood latch and bracket
GOOD hood struts
GOOD hatch struts
SEALED UP ABS Module and hardlines/braidedlines
SEALED UP Master cylinder
Brake booster
TONS of good harness/wiring/pigtails/sub-harness'
complete LOADED SOM doors with power lock/power window and NEW 25% tint
SOM 35th anniv (dif. spoiler than standard Z or SS) hatch/glass/spoiler w/NEW 25% tint
COMPLETE rear quarters cut with MORE THAN ENOUGH to work with (6" into roof, 8" into rocker, and cut right down center of tail light bucket) BOTH SIDES.
COMPLETE rear bumper grid and main unit WITH all related hardware
SOM Rear bumper cover
STOCK rear springs and rubber isolators in good shape
3" Steel Driveshaft for M6 with 12bolt including solid 1330 front u-joint and solid 1350 rear u-joint with under 400 mi. on it. (MAY ship this, depends on buyer)
And a bunch more small stuff I'm sure I'm forgetting. Just hit me up if you need something you havent seen listed or SOLD in the thread, but PLEASE read through to make sure prior to PMing me, it's kinda hectic with 30 pm's a day of things that are answered in the thread already.
I DO have PayPal, and AM willing to ship MOST reasonably sized items.
Thank you.
Anything else you dont see listed, just PM me on.
Thanks y'all,
-Greg
**EDIT** I cut up the entire car and left no bolt unturned, or part not separated prior to hauling it off in tiny sawzall'd pieces. I'll make a list and update the thread as to what all is left.
SOME of what's left includes:
Front loaded calipers
Front rotors
Front spindles
Front STOCK struts and springs
6-Spd pedal assembly
hood release cable
throttle cable
cruise cable
ALL WEATHER STRIPPING, hatch rubber, door and NO LEAK T-top rubber
Wiper motor assembly and arms
Cowl panel
hood latch and bracket
GOOD hood struts
GOOD hatch struts
SEALED UP ABS Module and hardlines/braidedlines
SEALED UP Master cylinder
Brake booster
TONS of good harness/wiring/pigtails/sub-harness'
complete LOADED SOM doors with power lock/power window and NEW 25% tint
SOM 35th anniv (dif. spoiler than standard Z or SS) hatch/glass/spoiler w/NEW 25% tint
COMPLETE rear quarters cut with MORE THAN ENOUGH to work with (6" into roof, 8" into rocker, and cut right down center of tail light bucket) BOTH SIDES.
COMPLETE rear bumper grid and main unit WITH all related hardware
SOM Rear bumper cover
STOCK rear springs and rubber isolators in good shape
3" Steel Driveshaft for M6 with 12bolt including solid 1330 front u-joint and solid 1350 rear u-joint with under 400 mi. on it. (MAY ship this, depends on buyer)
And a bunch more small stuff I'm sure I'm forgetting. Just hit me up if you need something you havent seen listed or SOLD in the thread, but PLEASE read through to make sure prior to PMing me, it's kinda hectic with 30 pm's a day of things that are answered in the thread already.
I DO have PayPal, and AM willing to ship MOST reasonably sized items.
Thank you.
Anything else you dont see listed, just PM me on.
Thanks y'all,
-Greg
#86
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
SOME of what's left includes:
Front loaded calipers w/brackets and hoses........$100
Front rotors (no pulsation prior to crash)............$30
Front spindles and hubs..................................$50
Front STOCK struts and springs.........................$60
6-Spd pedal assembly......................................$75
hood release cable..........................................$15
throttle cable............................................. ....$15
cruise cable............................................. .......$15
ALL WEATHER STRIPPING, hatch rubber, door and NO LEAK T-top rubber...PM me on what ya need
Wiper motor assembly and arms..........................$40
Cowl panel............................................. .........$25
hood latch and bracket......................................$25
GOOD hood struts............................................ .$30
GOOD hatch struts............................................ $30
SEALED UP ABS Module and hardlines/braidedlines...$65
SEALED UP Master cylinder..................................$45
Brake booster........................................... ........$45
TONS of good harness/wiring/pigtails/sub-harness'....PM me what ya need
complete LOADED SOM doors with power lock/power window and NEW 25% tint.............$150 per door -OR- $250 for the PAIR
SOM 35th anniv (dif. spoiler than standard Z or SS) hatch/glass/spoiler w/NEW 25% tint.......$175
COMPLETE rear quarters cut with MORE THAN ENOUGH to work with (6" into roof, 8" into rocker, and cut right down center of tail light bucket) BOTH SIDES..............$240 per side -OR- $425 for the PAIR
COMPLETE rear bumper grid and main unit WITH all related hardware......$60
SOM Rear bumper cover (no waves or spiderwebbing).................................... ..$100
STOCK rear springs and rubber isolators in good shape........$40
3" Steel Driveshaft for M6 with 12bolt including solid 1330 front u-joint and solid 1350 rear u-joint with under 400 mi. on it. (MAY ship this, depends on buyer)............................................ ........................$250
NEW gelcoated NON-GM nosecone with filler/smoothed holes for grill tabs..............$100
NEW gelcoated NON-GM Driver front fender............................................ ...........$60
98-02 Camaro Headlights (pair)............................................ ..........................$100
I can be reached THROUGH THE WEEK via PM or email @ Littlemotor357@yahoo.com, unfortunately my home computer **** the bed last week, so I am responding on the computer at my shop.
Thanks guys,
-Greg
Front loaded calipers w/brackets and hoses........$100
Front rotors (no pulsation prior to crash)............$30
Front spindles and hubs..................................$50
Front STOCK struts and springs.........................$60
6-Spd pedal assembly......................................$75
hood release cable..........................................$15
throttle cable............................................. ....$15
cruise cable............................................. .......$15
ALL WEATHER STRIPPING, hatch rubber, door and NO LEAK T-top rubber...PM me on what ya need
Wiper motor assembly and arms..........................$40
Cowl panel............................................. .........$25
hood latch and bracket......................................$25
GOOD hood struts............................................ .$30
GOOD hatch struts............................................ $30
SEALED UP ABS Module and hardlines/braidedlines...$65
SEALED UP Master cylinder..................................$45
Brake booster........................................... ........$45
TONS of good harness/wiring/pigtails/sub-harness'....PM me what ya need
complete LOADED SOM doors with power lock/power window and NEW 25% tint.............$150 per door -OR- $250 for the PAIR
SOM 35th anniv (dif. spoiler than standard Z or SS) hatch/glass/spoiler w/NEW 25% tint.......$175
COMPLETE rear quarters cut with MORE THAN ENOUGH to work with (6" into roof, 8" into rocker, and cut right down center of tail light bucket) BOTH SIDES..............$240 per side -OR- $425 for the PAIR
COMPLETE rear bumper grid and main unit WITH all related hardware......$60
SOM Rear bumper cover (no waves or spiderwebbing).................................... ..$100
STOCK rear springs and rubber isolators in good shape........$40
3" Steel Driveshaft for M6 with 12bolt including solid 1330 front u-joint and solid 1350 rear u-joint with under 400 mi. on it. (MAY ship this, depends on buyer)............................................ ........................$250
NEW gelcoated NON-GM nosecone with filler/smoothed holes for grill tabs..............$100
NEW gelcoated NON-GM Driver front fender............................................ ...........$60
98-02 Camaro Headlights (pair)............................................ ..........................$100
I can be reached THROUGH THE WEEK via PM or email @ Littlemotor357@yahoo.com, unfortunately my home computer **** the bed last week, so I am responding on the computer at my shop.
Thanks guys,
-Greg
#90
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thanks and just let me know.
-Greg
#92
On The Tree
iTrader: (3)
Join Date: Jan 2002
Location: HorsePower Central
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i couldnt find anything about fog light? are they still good if they were on the car, if so how much? also if you still have the center console lid only, how much? thx. shipped to 40207