EPS cam and Manley springs with very low miles....
#1
EPS cam and Manley springs with very low miles....
Category: Engine - Power Adders
Price: $350
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V
Location (State): TX
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
Im looking to get $350 for both cam and springs, or $100 for the springs and $285 for the cam. I prefer picked up but I can ship at buyer's expense. Im also willing to trade for....well just let me know what you got....lol! Im open to anything.
The specs on the cam are:
230/234 .600”/.602” 111LSA +2 advance (with 1.7 ratio rockers)
Comp EPS/EPS lobes 54-000-11 3 bolt cam core
13118R/13119R HR111LSA +2 advance (109 installed intake centerline)
Cam Valve Events 0.006 0.050 0.200
Intake Duration - ID 279 230 151 13118R EPS lobe .600"
Exhaust Duration - ED 283 234 155 13119R EPS lobe .602"
Lobe Center Angle - LSA 111 111 111
Intake Centerline - ICL 109 109 109
Intake Valve opens - IVO 30.5 6 -33.5 BTDC (- indicates ATDC)
Intake Valve closes - IVC 68.5 44 4.5 ABDC
Exhaust Valve Opens - EVO 74.5 50 10.5 BBDC
Exhaust Valve Closes - EVC 28.5 4 -35.5 ATDC (- indicates BTDC)
Exhaust Centerline - ECL 113 113 113
Overlap 59 10 -69 degrees
Last edited by ELDIABLO; 07-19-2010 at 12:48 AM.
#7
Dude im open to anything....doesn't even have to be car related..hell, It can be a date with your sister/cusin...lol! Jk But seriously im open to anything.
BUMP!
Here is the Dyno sheet.....and a Idle/ drive around clip. Sounds it's the best but you get an Idea.
http://www.youtube.com/watch?v=7dWanL-MHy8
BUMP!
Here is the Dyno sheet.....and a Idle/ drive around clip. Sounds it's the best but you get an Idea.
http://www.youtube.com/watch?v=7dWanL-MHy8
Trending Topics
#9
It would work good with stock heads, as far as power..well I don't know. Its kinda hard to say. Some cars make more power than others, and some dynos can give higher or lower numbers. But If I had to guess, this cam on a stock head ls1 with bolt on will make around 400hp range.