Going back to stock! PICS ADDED! UPDATED PRICES
#1
Launching!
Thread Starter
iTrader: (12)
Join Date: Jul 2005
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
Going back to stock! PICS ADDED! UPDATED PRICES
Category: Audio/Video/Electronics
Price: $500
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): IL
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
Not pictured I have 60lb siemens deka injectors, these have roughly 1k miles.
SOLD
Also not pictured (still in car can drive if you'd like) I have a built art carr th400 w/ brake, 3600 stall, dipstick, hammer shifter and cable I bought it used, worked perfect for me, I've got about 40 passes on it this year w/ basically no street use. Went 1.37 60fts w/ 134mph, trans was working great for me. I can offer this as a complete swap (have cross member, d/s, flywheel, etc..) lmk what your interested in... but for what is listed above...
SOLD
Last not pictured as is still in the car, currie 9'' rear end, has a spool w/ 35 spline axles, currently has a 3.5 gear in it and will also include a 3.2X gear set as well. Makes no noise and worked great for me, went 1.37 60ft w/ no problems.
Asking 1800$ + shipping
MS3 cam has roughly 1k miles on it. 237/242 .603/.609" on a 113+1lsa.
SOLD
I have a pair of moroso DS2 front runners, they're practically brand new.
SOLD
Also have a pair of pro stars, these are off of my 99 z28 fit perfect w/ the included 1/4'' spacer, will also come w/ tires pictured which are in good shape, center caps, and lug nuts.
SOLD
Mickey Thompson 28 x 10.5-15S These things have 3 passes on them and are basically still new!
Asking 200 + shipping
BBK 80mm tb w/ adapter for 78mm intake
SOLD
More to come.....
Last edited by stonemonk; 10-17-2010 at 04:07 PM.
#3
Launching!
Thread Starter
iTrader: (12)
Join Date: Jul 2005
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
Summit Stars 15 x 8 w/ hoosier 28 x 10.5 slicks, wear marks are still good in the slicks, plenty of life left, rims are screwed w/ moroso screws. These are off of my 99 z28, calipers did need some grinding.
SOLD
N2o fuse dedicated aluminum fuel cell. Is in perfect working order, and fits very nicely in the f body. Comes w/ hi and lo pressure spring for regulator and also comes w/ braided line to get to your solenoid.
Asking 600$ shipped
Weiand lingenfelter Intake plumbed w/ a NX direct port kit. This kit can be offered several different ways, I have bottles if you need, -6 supply line, the noids are from the nitrous outlet, purchased last year w/ roughly 5 track visits they are in great shape. Also comes w/ a gigantic purge noid (nos solenoid) can come w/ absolutely everything needed, wot switch, relays, large variety of jets, lmk what you need and we can work something out. Would perfer to sell as a whole but open to offers. Price will be for the 3 noids, bottle, -6 feed, intake and dp kit.
Asking 975 + shipping again this can be worked w/ depending what you want....
SOLD
N2o fuse dedicated aluminum fuel cell. Is in perfect working order, and fits very nicely in the f body. Comes w/ hi and lo pressure spring for regulator and also comes w/ braided line to get to your solenoid.
Asking 600$ shipped
Weiand lingenfelter Intake plumbed w/ a NX direct port kit. This kit can be offered several different ways, I have bottles if you need, -6 supply line, the noids are from the nitrous outlet, purchased last year w/ roughly 5 track visits they are in great shape. Also comes w/ a gigantic purge noid (nos solenoid) can come w/ absolutely everything needed, wot switch, relays, large variety of jets, lmk what you need and we can work something out. Would perfer to sell as a whole but open to offers. Price will be for the 3 noids, bottle, -6 feed, intake and dp kit.
Asking 975 + shipping again this can be worked w/ depending what you want....
Last edited by stonemonk; 10-17-2010 at 04:08 PM.
#5
Launching!
Thread Starter
iTrader: (12)
Join Date: Jul 2005
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
Zex bottle heater worked great, clean and easy to install, built in t-stat.
Asking 75 + shipping
Just a few things I will be putting up shorty once i can take some more pics will be, a complete hsw plate kit, hsw interface, zex kit, Fuel Pressure Safety switch, I have a mainline 4150 carb plate kit, A spare tire bottle mounting kit, SLP lid, I'm sure there's more im forgetting, Ill put the rest up later. Thanks for looking.....
You can get ahold of me at 708-703-1505 name is chris....
Asking 75 + shipping
Just a few things I will be putting up shorty once i can take some more pics will be, a complete hsw plate kit, hsw interface, zex kit, Fuel Pressure Safety switch, I have a mainline 4150 carb plate kit, A spare tire bottle mounting kit, SLP lid, I'm sure there's more im forgetting, Ill put the rest up later. Thanks for looking.....
You can get ahold of me at 708-703-1505 name is chris....
#6
Launching!
Thread Starter
iTrader: (12)
Join Date: Jul 2005
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
Car was set up for spray, the motor times are not very impressive, It went 12.1 @ 113 w/ a 1.9 60ft....
RED99z28 - I don't have rear pro stars, I was running the summit stars out back w/ the pro stars up front... goofy... i know... sorry
RED99z28 - I don't have rear pro stars, I was running the summit stars out back w/ the pro stars up front... goofy... i know... sorry