L92, LS3, LSA and LS9 low mile cyl heads
#61
9 Second Club
iTrader: (31)
Category: Engine - Intake/Fuel
Price: $585
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V
Location (State): WI
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9
LS Engine?: Fits LS Engine
.625 on the Ls9 vs .47x on the L92/LS3's. Plus the LS9 is made of the A356T6, (think C5r block). Also gets you 2.165 titanium Del West intake Valve and a 1.59 sodium filled exhaust valve. Hang tight, I just grabbed some pics of mine last night
#64
#67
9 Second Club
iTrader: (31)
I'm going to start out with stock size 11pm studs. As the dowels locate the heads to the block, it "should" work. If not, I have two options: both prevail to drilling and tapping he block.
Katech sells the ls9 12mm head studs for $300, or I can get 1/2" studs from Kurt Urban for $200.
Might as well do a little r&r first though for those interested, right? Worst case, the 11mm give me problems and I have the block tapped for bigger studs. the heads will see some decent boost, so itll be a good test of the 11mm studs on the ls9 heads
#68
TECH Fanatic
iTrader: (26)
Join Date: Mar 2010
Location: Milledgeville, GA
Posts: 1,909
Likes: 0
Received 0 Likes
on
0 Posts
I'm going to start out with stock size 11pm studs. As the dowels locate the heads to the block, it "should" work. If not, I have two options: both prevail to drilling and tapping he block.
Katech sells the ls9 12mm head studs for $300, or I can get 1/2" studs from Kurt Urban for $200.
Might as well do a little r&r first though for those interested, right? Worst case, the 11mm give me problems and I have the block tapped for bigger studs. the heads will see some decent boost, so itll be a good test of the 11mm studs on the ls9 heads
Katech sells the ls9 12mm head studs for $300, or I can get 1/2" studs from Kurt Urban for $200.
Might as well do a little r&r first though for those interested, right? Worst case, the 11mm give me problems and I have the block tapped for bigger studs. the heads will see some decent boost, so itll be a good test of the 11mm studs on the ls9 heads
#69
OWN3D BY MY PROF!
iTrader: (176)
I'm going to start out with stock size 11pm studs. As the dowels locate the heads to the block, it "should" work. If not, I have two options: both prevail to drilling and tapping he block.
Katech sells the ls9 12mm head studs for $300, or I can get 1/2" studs from Kurt Urban for $200.
Might as well do a little r&r first though for those interested, right? Worst case, the 11mm give me problems and I have the block tapped for bigger studs. the heads will see some decent boost, so itll be a good test of the 11mm studs on the ls9 heads
Katech sells the ls9 12mm head studs for $300, or I can get 1/2" studs from Kurt Urban for $200.
Might as well do a little r&r first though for those interested, right? Worst case, the 11mm give me problems and I have the block tapped for bigger studs. the heads will see some decent boost, so itll be a good test of the 11mm studs on the ls9 heads
A 1mm sleeve might be a little hard to get a hold of in that length, ID, and OD.
#71
Feb 2 ready to go:
LS3 intake complete -$365
LS7 intake complete -$425
*Heads assembled complete, including, valves, springs,seals, retainers and rockers:
*LS7 #451 -$1150
*L92 #364 -$495
*L92 #823 as new takeoffs -$595
*LS2 #243 as new takeoffs, yellow springs - $450 --Sold
*LS2 # 243 yellow springs- $425
*LS2 # 243 silver springs $385
LS2 & LS7 LS3 TB DBW TB -$200
Fedex $42/heads-- $ 22/intake
Week Feb 7th
*3 sets LS3 # 821- $595/set 1 set sold
Bruce@PowrMax.com
LS3 intake complete -$365
LS7 intake complete -$425
*Heads assembled complete, including, valves, springs,seals, retainers and rockers:
*LS7 #451 -$1150
*L92 #364 -$495
*L92 #823 as new takeoffs -$595
*LS2 #243 as new takeoffs, yellow springs - $450 --Sold
*LS2 # 243 yellow springs- $425
*LS2 # 243 silver springs $385
LS2 & LS7 LS3 TB DBW TB -$200
Fedex $42/heads-- $ 22/intake
Week Feb 7th
*3 sets LS3 # 821- $595/set 1 set sold
Bruce@PowrMax.com
Last edited by See5; 02-07-2011 at 11:01 AM.
#72
Teching In
iTrader: (2)
Join Date: Jun 2009
Location: GA.
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Buy with confidence from Bruce. He is a great seller with fast shipping. It's been a couple of months but I just wanted to say thanks for a great set of L92 heads for my c5. Oh almost forgot about the ls2 tb I bought from you also. Thanks..
#78
#79
On The Tree
iTrader: (27)
If I got it, Tim99ws6 bought his last set and was posting pictures in response to my questions about LS9 heads.
However, I am building 3 engines, which is what I usually do. Not sure what that has to do with this thread, though?
#80
You're not understanding that right. I have yet to buy a set.
If I got it, Tim99ws6 bought his last set and was posting pictures in response to my questions about LS9 heads.
However, I am building 3 engines, which is what I usually do. Not sure what that has to do with this thread, though?
If I got it, Tim99ws6 bought his last set and was posting pictures in response to my questions about LS9 heads.
However, I am building 3 engines, which is what I usually do. Not sure what that has to do with this thread, though?