AFR valve springs #8002
#1
AFR valve springs #8002
Category: Racing Parts
Price: $1
Location (State): FL
Item Condition: Used
Shipping Information: Item Can be Shipped
LS Engine?: Fits LS Engine
SPECS BELOW:
PART#AFR-8002
SIZE-1.550 OD
PRESSURE-165# @ 1.980
MATERIAL-Chrome Silicon
COIL BIND-1.180
RATE-475
LIFT-650
UPDATE:any ls head guys on here im not a machinist i do not know if they will fit please call afr and ask they will know best im giving all the specs to help you out if you know what you need.
(THE HEAD PICTURED IS NOT! FOR-SALE AND IS NOT APART OF THIS LISTING)
Last edited by lordrazo; 10-31-2011 at 01:28 PM.
Trending Topics
#8
TECH Apprentice
iTrader: (8)
Join Date: Mar 2008
Location: Quinlan/DFW, Tx
Posts: 395
Likes: 0
Received 0 Likes
on
0 Posts
Exactly how low are the miles on these and what was the driving conditions spirited, normal easy DD or mixed? Im gonna guess spirited or mixed cause thats what id do, just concerned about one breaking and dropping a valve cause of a used spring.
Ill be using them on worked over 241 heads and would like to know if they would fit in the stock seats without machining as well as height wise. I know you posted Outer Diameter size but i dont have a caliper to guage and you dont have a height. Im gonna look em up to see if it says they will fit but im interested with more info on these please cause it will save me a chunk of change.
Scratch it bud just noticed these are for a solid roller set up and im gonna be using hydraulic.
Free bump^ still good questions to answer if you could
Ill be using them on worked over 241 heads and would like to know if they would fit in the stock seats without machining as well as height wise. I know you posted Outer Diameter size but i dont have a caliper to guage and you dont have a height. Im gonna look em up to see if it says they will fit but im interested with more info on these please cause it will save me a chunk of change.
Scratch it bud just noticed these are for a solid roller set up and im gonna be using hydraulic.
Free bump^ still good questions to answer if you could
#9
they have a few hundred miles on them no more!!! street and track im not a machinist so i do not know if they will fit in your head i did give the measurements and they are listed on afr's website you can call them and ask im an lt1 sbc bbc guy i do not know what springs will work on your ls1 head sorry just give them a call