Ported & milled heads (price lowered!)
#1
TECH Enthusiast
Thread Starter
iTrader: (12)
Join Date: Nov 2008
Location: Long Island, NY
Posts: 590
Likes: 0
Received 0 Likes
on
0 Posts
Ported & milled heads (price lowered!)
Category: Engine - Intake/Fuel
Price: $460
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO
Location (State): NY
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS1/LS6
LS Engine?: Fits LS Engine
Update: After some flow bench testing, I changed my porting design. These new heads are 10+ cfm stronger up top and also have gains in the low lift numbers as well. These should flow exactly 270 cfm on the intake and 195 cfm on the exhaust. UPDATED PICTURES IN LOWER POST!
Runner volumes are about 213-214cc intake and 77-78cc exhaust.
Porting:
Opened and blended seats to bowl on intake/exhaust ports (matched all diameters to within +/- 3 thousandths)
Narrowed, shaped, blended intake/exhaust valve guide bosses.
Completely removed intake rocker bolt hump.
D shaped exhaust port exit (matched diameters within +/- 3 thousandths).
Only sanded intake/exhaust runners to keep cc’s low and air velocity high.
Sanded runners (80grit>180grit>220grit)
Removed 75% of the swirl ramp
Heads are milled 10 thousandths (checked) $80 value
All valves were lapped before reinstalling
Comes with stock valves, springs, retainers all in great condition.
Can ship heads in 1 business day with tracking packaged very safely.
Only $460.00 firm + shipping/paypal fee. PM for shipping quote. Thanks for looking.
Last edited by camz28arro; 11-13-2011 at 03:19 PM.
#3
TECH Enthusiast
Thread Starter
iTrader: (12)
Join Date: Nov 2008
Location: Long Island, NY
Posts: 590
Likes: 0
Received 0 Likes
on
0 Posts
It all depends upon the setup (cam, headers, tune, ect) but if 243 heads gain 20rwhp on a certain engine, I'd say these would be 25-30rwhp. These heads would also raise your compression ratio to 10.3:1
Last edited by camz28arro; 10-21-2011 at 01:13 PM.