j88l98irocz

iTrader: (44)

Category: Engine - Complete Motors
Price: $4000
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V, 67-92 Chevrolet Camaro, 67-92 Pontiac Firebird
Location (State): PA
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS1/LS6
LS Engine?: Fits LS Engine

Hey guys,
Entertaining the idea of selling my forged iron ls shortblock good for 1000hp
LM7 block
ARP head studs
ARP main studs
Wiseco forged flat top pistons CR: 9.4:1 with 65cc head
Wiseco rings 0.028" top
0.032"
second (gaps for boost or heavy nitrous)
Manley H-beam 4340 6.100" length
8740 ARP bolts
GM 5.3 Crank with 24 tooth reluctor wheel.
Clevite P-seriesMain bearings - 0.0026"
Clevite P-series Rod Bearings - 0.0024"
Small ends of rods clearanced 0.0008"
Trick flow double roller billet timing chain adjustable
keyway.
SLP hi-volume oil pump
Cam motions custom ground turbo cam
Ls7 lifters
Jegs Sfi balancer good to 12k rpms 10% under driven
F body oil pan with dash 4 feed and dash 10 drain tig welded in
Front and rear timing covers installed, valley cover installed with new gaskets and front/ rear main crank seals. Also have a set of brand new mls head gaskets I'll throw in. All this engine needs to be turn key is heads, pushrods, rockers, intake mani and accessories.





4k or best reasonable offer
Thanks, John

j88l98irocz

iTrader: (44)

Ttttttt

j88l98irocz

iTrader: (44)

I'll sell it cheaper without the cam. Offers anyone?

88silvergt

iTrader: (8)

Out of curiosity what are the specs on the cam? I'm doing a stock longblock 5.3 with turbo and having Pat-G spec me a cam. Curious to see how similar they will be. Can pm me if you don't want to post that info. Thanks,T.

j88l98irocz

iTrader: (44)

I'll post the cam specs some time today. Any offers anyone I found another Camaro SS I'd really like to buy

j88l98irocz

iTrader: (44)

Cam motions custom ground turbo cam specs

228 370 220 350 16

Intake and exhaust
Lobe seperation 116.2 cam DEG

INTAKE
Intake centerline 112.2 ATDC
Duration 228.7 CRANK DEG
Lobe lift .36988 IN
Valve lift .6288 IN
Lobe area 28.88 IN*DEG

Exhaust
Valve open 50 BBDC
Centerline 120.2 BTDC
Valve close 9.8 ATDC
Duration 220.2. Crank degrees
Lobe lift .35024 IN
Valve lift .5954 IN
Lobe area 26.48 IN*DEG

j88l98irocz

iTrader: (44)

I will sell without the cam and a stock f body pan for those who do not want to go turbo.
I'd like to move this no offers?

Beatdown Z

iTrader: (18)

Hmmm... How far are you from Newark, DE?

j88l98irocz

iTrader: (44)

About an hour and fifteen minutes with no traffic.

Beatdown Z

iTrader: (18)

It's still stock 5.3L bore?

Who built it?

j88l98irocz

iTrader: (44)

Stock bore. The engine had 1,600 original miles when it was taken apart to install new parts, Local well known machine shop.
Pretty sure it's sold though.