Total Engine Airflow Trick Flow 235's
#1
Total Engine Airflow Trick Flow 235's
Category: Racing Parts
Price: $2200
Location (State): NC
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9
LS Engine?: Fits LS Engine
**NEVER RUN OR RACED** **ZERO USAGE ON THESE HEADS**
Serial Numbers are "K18712" "4578" and "K18706" "4578" and according to Mike @ TEA these heads are set up as follows:
Ferrea 2.08" intake valves,Ferrea 1.60" exhaust valves with Trick Flow Extreme .660" springs by PAC for Trick Flow(160# on the seat,450#/inch rate,installed height 1.800",coil bind 1.100",seal to retainer clearance .850"),Titanium retainers,235cc intake,86cc(?) exhaust,65cc combustion chamber,bronze guides.
TEA recommends a 4.030" bore for this head but I know of two 4.003" and4.005" bore LS2/6.0 motors that have run this head with no problems.
I was going to swap my 243's out for these but I tore something up in my transmission at Dragging Rights @ Piedmont. Transmission is a priority over a head swap.
THANKS FOR LOOKING !!!! MIKE junkyardwelder@triad.rr.com
Last edited by weldermike27408; 07-04-2013 at 11:23 AM.
#6
cash + bare used aluminum LS2 block with main caps,even if it needed sleeves as long as the block(casing)is not damaged at all but thats all id really be interested in trading for