Hand Ported 243 ls6 heads..
#1
Hand Ported 243 ls6 heads..
Category: Accessories
Price: $750
Location (State): CA
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS1/LS6
LS Engine?: Fits LS Engine
Trending Topics
#8
Thanks for all the compliments.. Sorry I have some Pms in my inbox I have been very busy as we are getting are big rig ready to ship Road America for next weekends event.. I will try to get all Pms answer tonite..
Thanks again
David..
Thanks again
David..
#14
Taking them to get some flow numbers I have about six serious people interested but may be doing a DIY on the exhaust ports m. So I bought 2 more sets if anyone is interested. I will have flow data hopefully tonite..
#18
So heads were on the bench this morning I was pretty happy with the result as was the guy running the bench.. We agreed there is some more flow In The heads after a valve job and some nicer profiled valves also with Some chamber work this would all increase flow at low lift. these heads were 224 cc's and 84 on the exhaust and flowed on a 4 Inch bore port velocity's were very good.. Excuse the pic the heads were dirty the got stained in the ultra sonic cleaner someone put krytox grease in it so the only port I cleaned was the one that was flowed.. We did take a junk exhaust valve and put a small back cut and it hit 303 cfm but we scratched that number since we are only using stock valves.
#20
You can compare them in tony memos thread.. I'd say for the price it's a good deal the exhaust was a little soft IMO but I didn't have a pipe to flow though. The low lift could be improved but that comes with doing a valve job and maybe a little chamber work with in shrouding the valve and adding a nice style valve like a Manley stainless.. But that all come
With money thes are a 40 cfm improvement over stock on the intake at peak lift. On most cams.
With money thes are a 40 cfm improvement over stock on the intake at peak lift. On most cams.