06-12 c6 z06 front calipers w/ pins (pics added)
#1
06-12 c6 z06 front calipers w/ pins (pics added)
Category: Accessories
Price: $500
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V, 67-92 Chevrolet Camaro, 67-92 Pontiac Firebird, Front wheel drive vehicles
Location (State): TX
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6, LT1/LT4, Small Block, Big Block
LS Engine?: Fits LS Engine
713 two53 0229 Text or PM
Thanks, Randy
**PICS ADDED. FOUND SOMETHING THAT I REALLY WANT TO BUY NOW SO LETTING THEM GO CHEAP. 600.00 SHIPPED
Last edited by CRASHz427; 11-13-2013 at 09:32 AM. Reason: PICS
#6
Lots of people have mixed feelings on which are better. There are tons of debates that can be searched on here. Truth is Ive only seen a handful of cars with these brakes. Everyone runs the cts or camaro brembos. The cts and camaro brembos are 4 piston fronts, these are 6 pistons. I feel the 6 pistons are a better caliper and they look better. One of the major differences is with the 6 piston you have to run either a min 19" wheel ( some 18" will clear ), or the high pad weld rts's wil work too. Hopefiully someone will chime and add more info incase I missed something.
Trending Topics
#9
Bump!!!!
I still have these. Need them gone. A few updates on the calipers. Upon further inspection of the pins I trashed 3 of them due to the allen heads looked like they were starting to round off. These can be purchased for $4 ea. 1 of the calipers still has a pin it (see pics) that the head is currently stripped out on. I did not try to extract it. I do not have the proper tools for that and didnt want to damage the caliper. However the one pin in the caliper will not effect the operation or removal of the pads since the others were removed with ease. IMO the pin is not ceased in the caliper. The other pins came out pretty easy so these calipers have not been overheated. ( On original teardown all the seals and boots were intact and not melted )
Price drop to 500.00 obo shipped. Ill cover PP. Feel free to make offer.
I still have these. Need them gone. A few updates on the calipers. Upon further inspection of the pins I trashed 3 of them due to the allen heads looked like they were starting to round off. These can be purchased for $4 ea. 1 of the calipers still has a pin it (see pics) that the head is currently stripped out on. I did not try to extract it. I do not have the proper tools for that and didnt want to damage the caliper. However the one pin in the caliper will not effect the operation or removal of the pads since the others were removed with ease. IMO the pin is not ceased in the caliper. The other pins came out pretty easy so these calipers have not been overheated. ( On original teardown all the seals and boots were intact and not melted )
Price drop to 500.00 obo shipped. Ill cover PP. Feel free to make offer.