BLOWNBLUEZ06

iTrader: (17)

Category: Engine - Power Adders
Price: $4250
Location (State): TX
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9
LS Engine?: Fits LS Engine

I've sweetened the pot some on this deal, so make sure you read all my posts below. Jan 18th, I reduced the price again, as promised.

Purchased used to put on my 6.2l truck. I never got a chance. I'm the car builder that never has time to work on his own stuff. Came from a friend and owner of East Coast Supercharging. Includes a brand new heat exchanger, Nice boost and fuel pressure gauges as well as a pillar mount for a 2008-14 GM fullsize truck. It includes a Innovators West OD balancer and a Alky Control kit, bolts, injectors, lines and hoses, water pump and reservoir for the intercooler system, mounting bracket with tensioner and more. The longer this stays up for sale, the lower the price will go. I'm not keeping it. I don't have the time and my priorities have changed.
I'm well known in the industry and on the Corvette Forum as a vendor, so buy with confidence.

BLOWNBLUEZ06

iTrader: (17)

Although this fits the LS3 and L92, if you have a LS1, LS2, LS6, you can get the lower manifold for any cathedral port setup from here for 325.00
http://www.superchargersonline.com/i...oducts_id=8205

madmike9396

iTrader: (29)

Need this on my escalade lol

BLOWNBLUEZ06

iTrader: (17)

I completely agree!

BLOWNBLUEZ06

iTrader: (17)

still available.
If you're wanting pics of anything else let me know. I didn't take close up pics of all the bolts and such, but they're included.

sami-SWZ

iTrader: (2)

Bump for a good seller, i have deal with bret before, outstanding seller....everything he sells are top notch stuff, GLWS

transam69230

iTrader: (49)

Is this complete, bolt in and go or anything necessary to make it work? Such as fans or anything like that?

Obviously it will need a tune.

BLOWNBLUEZ06

iTrader: (17)

Thanks Sami!

BLOWNBLUEZ06

iTrader: (17)

I'm not aware of any missing parts. I counted all the mounting bolts, injectors, water pump, lines etc. It's got a brand new outside intercooler core that it's coming with. I have a new line for the boost gauge with a new nut and ferrule and a brand new sending unit and harness for the fuel pressure gauge. If it's missing something, it's not going to be anything significant and if I'm wrong, I'll make it right. Nobody's ever purchased anything from me and gotten mad about it. If they brought something to my attention, I took care of it. Hell, I had a guy buy a set of Trick Flow heads from me and a year later texted me about them leaking from inside the holes that the large bolts go through. I offered to help and he ended up getting a new set of castings since it was an obvious defect that wasn't caused by the end user.

It doesn't include the tuning module that they come with, but at this elevated boost level, that's worthless anyways. I'll make you the same offer I made another interested party last night. I can get HPTuners at a discounted price. If you want to add that in, or if you already have a HPTuners module, I am willing to write you a good start-up tune to get you going nicely. I've been tuning for 25 years, professionally for the past 8. I'll support you through getting it installed and running good. For WOT, you'll need a good wideband. I've got an old Innovate LC1 with XD-16 display that I paid 350.00 or so for, years back. It needs an 02 sensor that you can pick up at Oreilly's and then it should work fine. I'll even throw that in at NO CHARGE.

Let me know if that works for you.

BLOWNBLUEZ06

iTrader: (17)

Price reduced!

breecher_7

iTrader: (1)

Someone needs to hurry up and buy!

BLOWNBLUEZ06

iTrader: (17)

Agreed!

BLOWNBLUEZ06

iTrader: (17)

Price reduced again..

UATahoe

iTrader: (8)

So to make this work on an LS1 out of an F-body, I would need the lower tub you mentioned and then also verify the pulley alignment? Is the 6.2 alignment the same as the 5.3 truck accessories?

BLOWNBLUEZ06

iTrader: (17)

The balancer and serpentine spacing/alignment for the 99-2013 trucks and 06-08 Trailblazers is the same, so they'll all fit with the current configuration. For the F body, it might just require a blower pulley with a different offset. Would have to call Magnuson to be sure.

BLOWNBLUEZ06

iTrader: (17)

still available.

BLOWNBLUEZ06

iTrader: (17)

Sold, pending funds

DeathByNissan55

PM me pricing for just Innovators West OD balancer, bolts, lines and hoses, water pump and reservoir for the intercooler system, mounting bracket with tensioner.

What all is included with the Alky Control kit?