WTB 6.0 Lq4 or Lq9 block and crank with main caps
#1
On The Tree
Thread Starter
iTrader: (13)
Join Date: Sep 2009
Location: Virginia beach VA
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
WTB 6.0 Lq4 or Lq9 block and crank with main caps
I am looking for a 6.0 LQ4 or LQ9 bare block, with main caps and crank. I want something in good condition, no junk PLEASE! EMail me at strelkom@gmail.com with what you have, I am located in Stafford VA 22556 and will travel anywhere in a 300-400 mile radus. thanks!
Last edited by Boost-box; 11-27-2011 at 11:20 AM.
Trending Topics
#10
TECH Addict
iTrader: (3)
I am having a 408 built as we speak and soon as it is finished I will have a shortblock LQ4 for sale. The shortblock would consist of, stock LQ4 pistons, new rings, stock rods, new ARP rod bolts, standard crank with new Clevite bearings, mains, rods, cam bearings were all replaced. New LS2 timing chain, cam is a regrind, 236/242 @ .050" with .580"/.590" lift on a 112 LSA. All new GM torque to yeild bolts in the bottom end. I am unsure if the front, rear, valley covers go yet. I may or may not let the lifters go. All this depends on what I can find from now till the stroker is complete. For the shortblock I will take $650 with no covers or lifters. You can look at my build in my sig and check the engine out. I am having a low vacuum issue with my current setup with my enormous L92 heads so It was either rebuild what I had or move forward. I chose the more expensive path and moved forward. The engine is currently in my car and is running if you wanted to stop by and take a spin. I live in Germanton, NC so I am not sure if thats within your driving requirements or not.
#14
TECH Fanatic
I'll send you the crank for $110 including shipping.
https://ls1tech.com/forums/parts-cla...-part-out.html
https://ls1tech.com/forums/parts-cla...-part-out.html