WTB: Edelbrock 65073 Swap Headers 70-81 Fbody
#1
WTB: Edelbrock 65073 Swap Headers 70-81 Fbody
I want to buy a set of long tube conversion headers for 70-81 fbody. Edelbrock 65073 or dynatech 715-29410. Or any other conversion header for the same years.
Thanks
Thanks
#2
I got to say. The Dynatechs are a good bargain. I got mine from Summit Racing.
They are not SS, but they are coated. They Cost $399, but they come with everything you need. They even have the O2 bungs already welded in (The Eddys didn't).
They also come with plugs for the bungs for carb applications
Header gaskets and bolts
Reducers with Ball/Socket type of connection
The Eddys are not made anymore either. I think some places still have a few left, but are about $800+
If you are dead set on SS, Stainless Works has some too.
We need to keep in touch, Im going a sec gen conversion too (Obviously)
They are not SS, but they are coated. They Cost $399, but they come with everything you need. They even have the O2 bungs already welded in (The Eddys didn't).
They also come with plugs for the bungs for carb applications
Header gaskets and bolts
Reducers with Ball/Socket type of connection
The Eddys are not made anymore either. I think some places still have a few left, but are about $800+
If you are dead set on SS, Stainless Works has some too.
We need to keep in touch, Im going a sec gen conversion too (Obviously)
#3
I got to say. The Dynatechs are a good bargain. I got mine from Summit Racing.
They are not SS, but they are coated. They Cost $399, but they come with everything you need. They even have the O2 bungs already welded in (The Eddys didn't).
They also come with plugs for the bungs for carb applications
Header gaskets and bolts
Reducers with Ball/Socket type of connection
The Eddys are not made anymore either. I think some places still have a few left, but are about $800+
If you are dead set on SS, Stainless Works has some too.
We need to keep in touch, Im going a sec gen conversion too (Obviously)
They are not SS, but they are coated. They Cost $399, but they come with everything you need. They even have the O2 bungs already welded in (The Eddys didn't).
They also come with plugs for the bungs for carb applications
Header gaskets and bolts
Reducers with Ball/Socket type of connection
The Eddys are not made anymore either. I think some places still have a few left, but are about $800+
If you are dead set on SS, Stainless Works has some too.
We need to keep in touch, Im going a sec gen conversion too (Obviously)
#4
1981 was the first camaro I had back in 2000. I have a 1978 now.
Here is my link
http://www.pro-touring.com/showthrea...cross-one-day&
#5
nice car man, how well did that hotcksis suspension improve the cars feel for handling? I've been thinking about that for my 70 firebird. My car needs body work still but here it is.