2000silvergtp

I'm looking for some LS1 or LS6 (LS6 preferred) springs, retainers, and locks. If someone has any, please let me know. Thanks.

onesweetz06

iTrader: (-1)

I have a complete set of comp cams 918's with Z06 retainers and locks. These are the stock style Bee hive LS1 springs that can handle up too .600 lift.. I sell it all for $105 shipped.

Jeff@ramchargers

I sell Crane Cams valve spring, retainers (titanium), and lock kit of the LS1. It runs $302.99. Everything that you need. Let me know. Email me at JeffA@ramchargers.com or call 1-888-293-RAMS (7267).

Jeff

2000silvergtp

What are the stock numbers for these comp springs? I know that the LS6 springs are supposed to be 90# @ installed height of 1.77 or something to that nature. I'd like to stay with that or no more than 105#. I'm going to be installing these on my GTP with a new cam...and it's been recommended not to exceed 105# seat pressure. Thanks.

onesweetz06

iTrader: (-1)

Description
The 26918 Valve Spring is specifically designed for the LS1 Chevrolet cylinder head and can be used as stock replacements or in performance applications all the way up to 0.625" lift and at engine speeds to 7500 RPM. Engineered to fit stock heads with no machining, utilizing the stock valve seat and spring retainer.

May vary slightly from photo


Specifications
SDPC Part Number: CC26918-16
Manufacturer: Competition Cams
Outside Diameter (O.D.) : 1.290"/1.060"
Inside Diameter (I.D.) : .885"/.656"
Installed Pressure : 130 lbs @ 1.800"
Coil Bind : 1.085"
Maximum Lift : 0.625"

2000silvergtp

Unfortunately, these springs will not work for me. Notice the Installed pressure is 130# @ 1.800", the installed pressure would be more than that on my car considering the installed height of 1.77 or so. Too much pressure. Thanks for the offer and quick response though, I appreciate it!

2000silvergtp

Way more than I'm looking to spend! Sorry, but just being honest!

onesweetz06

iTrader: (-1)

You might want to double check your specs, the comp 918 springs are the ideaL stock replacement springs for LS1's under .600 lift, they are even pefect for a stock Z06 cam..

2000silvergtp

I'll check them out on there site and do some asking around, but keep in mind...these won't be going on an LS1. They are going into an L67. I will definitely be getting back with you if these will work though, as that is everything I need and for a good price. Thanks.

2000silvergtp

what are the stock specs on the LS1 springs. I wanted to make sure. The LS6 are 90# seat pressure...so are the LS1 springs less?

5POINT7

Well I've got a set of valvesprings, seats, locks, and retainers that came off my car when I did a cam swap last month.

Swapped a Comp 216/220 for a 231/237. The previous owner put the 216/220 cam in, so I don't know what kind of springs they actually are, or the specs on them. But they could be what you are looking for...or they could not.

I'd let the whole set go for $40 shipped. So if it's not what you need, it won't even cost you much...and you could re-sell them.

I've got pics of the set if you want.

Thanks

Droptopws6

iTrader: (13)

I have stock Ls-1 springs, retainers and pushrods

1Hawk

I have LS6 springs and retainers but no locks....lemme know