Who wants to give me a great price on a rotating assembly?
#1
Who wants to give me a great price on a rotating assembly?
I am (finally) ready to buy a forged rotating assembly for my LS1 engine. I plan on putting it all together myself. I've been price shopping around and it seems like the best prices are on eBay... however I would like to support the sponsors. Who has the best deal on budget forged rotating assemblies? I'm going to need a lot of stuff, and don't mind making a large purchase off one vendor if the price is right.
Building a low-compression (around 8.5:1) stock stroke, 3.905 bore engine. Want inverted dome pistons, not full dish. Need forged pistons, rods w/floating pins, crank, all bearings, main studs, etc.
Feel free to PM me with any offers, etc. Want to buy this week. Posted this on Internal Engine but not must feedback.
Thanks, -Dave
Building a low-compression (around 8.5:1) stock stroke, 3.905 bore engine. Want inverted dome pistons, not full dish. Need forged pistons, rods w/floating pins, crank, all bearings, main studs, etc.
Feel free to PM me with any offers, etc. Want to buy this week. Posted this on Internal Engine but not must feedback.
Thanks, -Dave
#3
8 second mod
iTrader: (37)
Join Date: Nov 2002
Location: East Side Performance! mASShole
Posts: 17,879
Likes: 0
Received 0 Likes
on
0 Posts
i have a set of lunate pro mod rods, used but still in good shape.
they have the arp rod bolts. suposed to handle 900 hp.
they cam out of my stock cube motor. they have to stock strock, and a 927 pin.
i will sell for 500 shipped. let me know.
i also have a stock crank with a keyway and asp keyed pully, nitrid treated, welded relucter wheel, polished and balanced. it needs a touch up, but cam from my car running strong. make an offer on it if interested.
they have the arp rod bolts. suposed to handle 900 hp.
they cam out of my stock cube motor. they have to stock strock, and a 927 pin.
i will sell for 500 shipped. let me know.
i also have a stock crank with a keyway and asp keyed pully, nitrid treated, welded relucter wheel, polished and balanced. it needs a touch up, but cam from my car running strong. make an offer on it if interested.
#5
9 Second Club
Originally Posted by ddnspider
id recommend sending a pm or calling Eric @ HPE he gave me and Ed Blown Vert great deals on our stuff.his username is racer7088
Trending Topics
#8
11 Second Club
iTrader: (9)
Join Date: Jan 2004
Location: Moundville, AL
Posts: 588
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ddnspider
id recommend sending a pm or calling Eric @ HPE he gave me and Ed Blown Vert great deals on our stuff.his username is racer7088
same eher i got a great deal on my motor its was actualy chepper to have them assy the whole thing as a shortblock than to just get a rotating assy. give him a shout you might be surprised what he can do for ya
#9
Erik at HPE did an awesome job with my motor and i have the utmost confidence in his abilities that i will have zero reliability issues with his work. Now my driving on the other hand..........
Greg
Greg