HPT problem need help.
Thread Starter
Formerly Low_LQ4 - 6/6/10
iTrader: (33)
Joined: Jan 2006
Posts: 2,446
Likes: 0
From: Elpaso, TX, Kuwait Now
HPT problem need help. Ok so I got a bunch of sandrails infront of me tht we took some DTC codes off of them and fixed some slight things around. but now everytime i try to reflash them I keep getting this popup window check it out:
Please help me out we need these sandrails out of the shop by tonight. Thanks a ton.
Please help me out we need these sandrails out of the shop by tonight. Thanks a ton.
Last edited by Low_LQ4; Oct 23, 2008 at 07:32 PM.
http://www.hptuners.com/forum/showthread.php?t=18995
Originally Posted by Bill@HPTuners
Its becase that operating system was never offered by GM for the vin number currently in the pcm, you'll need to have it flashed to a valid file & reread it.
Thread Starter
Formerly Low_LQ4 - 6/6/10
iTrader: (33)
Joined: Jan 2006
Posts: 2,446
Likes: 0
From: Elpaso, TX, Kuwait Now
Ok but my problem also is that my flash button wont function whn I read the file even to update the VIN so do I just flash the right VIN without reading the file?
I think you should be going directly to support@hptuners.com
with the VIN info and find out a VIN for that OS version, or vice
versa. They possibly would even modify the file for you to add
a dummy VIN for this offroad setup if you asked. Though probably
not tonight.
Crank learn is kind of fussy getting the process to run and will
be stymied by certain other codes (even dumb stuff like fuel
tank pressure). That 480 code maybe. You want to kill every
code that has to do with stuff that isn't there on a buggy.
with the VIN info and find out a VIN for that OS version, or vice
versa. They possibly would even modify the file for you to add
a dummy VIN for this offroad setup if you asked. Though probably
not tonight.
Crank learn is kind of fussy getting the process to run and will
be stymied by certain other codes (even dumb stuff like fuel
tank pressure). That 480 code maybe. You want to kill every
code that has to do with stuff that isn't there on a buggy.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Thread Starter
Formerly Low_LQ4 - 6/6/10
iTrader: (33)
Joined: Jan 2006
Posts: 2,446
Likes: 0
From: Elpaso, TX, Kuwait Now
ok So I got all the codes disabled and everything the buggy starts and runs fine but once you put your foot on the gas padel real fast it cuts out and the pedal stops working but the motor is still running I get the T/B actuator code popup .
Last edited by Low_LQ4; Oct 24, 2008 at 01:49 AM.
