Cheapest programmer for gear changes?
Thread Starter
11 Second Club
iTrader: (24)
Joined: Mar 2008
Posts: 2,554
Likes: 2
From: North East, MD
Cheapest programmer for gear changes? I won't be ready for a bit to head in for a tune but will be swapping to a 9" with 3.70's on the 25th. What can be used to change the setting for the 3.70 gears at the cheapest cost? If it has a feature to eliminate the two codes you get with a stall change that would be a plus! For now I have just been clearing them with an OBDII scanner. I can deal with those until I get tuned.
Reason I ask is I would like to go one time to the track before the head/cam/intake swap to see what it runs with the 9" and 3.70's. See if I can hit the 11's.
Reason I ask is I would like to go one time to the track before the head/cam/intake swap to see what it runs with the 9" and 3.70's. See if I can hit the 11's.
I have a super chips hand held for you.
You can do alot more then gears.
100 bucks plus shipping.
http://www.vichubbard.com/auto-part-...r-gm-2725.html
You can do alot more then gears.
100 bucks plus shipping.
http://www.vichubbard.com/auto-part-...r-gm-2725.html
Last edited by Sunset01TA; Jul 13, 2009 at 03:32 PM.
A Predator would be a great option.
You could set the gears, do some tuning, read/clear codes, and if you need a custom tune to disable some codes, i can do that for you via email.
Thanks
Mike
You could set the gears, do some tuning, read/clear codes, and if you need a custom tune to disable some codes, i can do that for you via email.
Thanks
Mike
