do i need a tune to run a 150 shot of nitrous
#2
Banned
iTrader: (1)
I ran a 350 shot on a almost stock tune. I have run a 150 on a stock tune with no issues
We ran a Zeitronix's Wide-Band & EGT setup. We also had a Zeitronix's Alarm system. The Alarm would go off all the time until we got the correct jetting. If we changed the jets we could use the Zeitronix data-logger to get the correct jetting.
We ran a Zeitronix's Wide-Band & EGT setup. We also had a Zeitronix's Alarm system. The Alarm would go off all the time until we got the correct jetting. If we changed the jets we could use the Zeitronix data-logger to get the correct jetting.
APPLICATIONS
The Audio Visual Warning and Trigger Box alarm is activated by Zeitronix Zt-2 Wideband AFR Meter. The audio alarm can be deactivated by adjusting the switch SW1 inside the box. The visual alarm and a relay trigger are always active.
- AFR too rich The alarm activates when too rich mixture is detected.
- AFR too lean The alarm activates when too lean mixture is detected.
- A combination of AFR too rich and AFR too lean alarms can be used to tune for a specific AFR window.
- EGT too high The alarm activates when EGT exceeds a safe user selected level.
- RPM too high Shift-light functionality with a bonus of audio alarm and a relay trigger.
- TPS too high The alarm activates when TPS exceeds a selected level.
- USER1 Input too high The alarm activated if a sensor connected to the USER1 input exceeds a selected level.
- USER1 Input too low The alarm activated if a sensor connected to the USER1 input is lower than a selected level.
- Relay trigger Open or close a relay circuit to activate or deactivate additional devices at a set warning level. Typically used to add a control to your boost setting, nitrous or alcohol injection and other devices capable of engine destruction.
The Audio Visual Warning and Trigger Box alarm is activated by Zeitronix Zt-2 Wideband AFR Meter. The audio alarm can be deactivated by adjusting the switch SW1 inside the box. The visual alarm and a relay trigger are always active.