HPTuners....LS1Edit competition....
Originally Posted by 1bad346Z28
any other updates on availability?
So far everything is on schedual.
Launching!
Joined: Nov 2002
Posts: 224
Likes: 0
From: Gulf Coast, Alabama
It was asked once but never answered, ya'll got the hook up for us LT1 cars.
Specifically, 96 Z28SS.
Thanks for providing some competition. Needing a tuner, but not willing to get carputing stuff.
Specifically, 96 Z28SS.
Thanks for providing some competition. Needing a tuner, but not willing to get carputing stuff.
There was an LT1-Edit before there was LS1-Edit.
Dunno how good or how fresh or how cheap. Also
TunerCat has various tool "chunks" for older ECM
systems that might suit you. You might want to hit
an LT1-focused tech board and see what else is
out there.
Dunno how good or how fresh or how cheap. Also
TunerCat has various tool "chunks" for older ECM
systems that might suit you. You might want to hit
an LT1-focused tech board and see what else is
out there.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
Teching In
Joined: Feb 2004
Posts: 14
Likes: 0
From: SLV Colorado
How well would this work for someone with little or no experience with this sort of thing. Are there Standard upgrade settings or does someone have to figure it all out for themselves?
Thanks,
Dave
Thanks,
Dave
We are still just moving along the production process.. Should be done any day now. If we continue to hold back on taking orders it looks like we just might ship them out as we receive them. We really are in no hurry to take pre-orders.
I did add a few new shots of our scan tool software on the HP Tuners site though.
I did add a few new shots of our scan tool software on the HP Tuners site though.
So, here is the real question, do you guys include a real guide that lets users Underrstand VE tables and units etc.? So far from the screen shots it looks very similar to the LS1Edit GUI. How much work have you done to define more of the tables that LS1Edit does not even see?
For example the delay time from TCC parameters being met till the PCM enables TCC lock (current time is about 5 seconds).
Another example is Min TPS to lock/unlock the TCC, Trucks unlock the converter at 0%TPS and there are no tables in edit to modify this.
Are you pioneering or do you have the same tables as edit currently has? I do like the fact that you don't encript the flash file for us Hex Edit guys but what of the normal user? We want more tables!
Ryan Karasek
For example the delay time from TCC parameters being met till the PCM enables TCC lock (current time is about 5 seconds).
Another example is Min TPS to lock/unlock the TCC, Trucks unlock the converter at 0%TPS and there are no tables in edit to modify this.
Are you pioneering or do you have the same tables as edit currently has? I do like the fact that you don't encript the flash file for us Hex Edit guys but what of the normal user? We want more tables!
Ryan Karasek
Originally Posted by Magnus
We are still just moving along the production process.. Should be done any day now. If we continue to hold back on taking orders it looks like we just might ship them out as we receive them. We really are in no hurry to take pre-orders.
I did add a few new shots of our scan tool software on the HP Tuners site though.
I did add a few new shots of our scan tool software on the HP Tuners site though.
http://www.hptuners.com/contact.html
I have already sent a email to that addy.
I'm really interested in the product but I need to talk it over with tech and answer some questions of mine. I'm going to need tuning quickly. Is there any possibility of getting the product and learning it quickly enough to get a decent tune before the end of March?
Thanks,
Judd
