PCM Diagnostics & Tuning HP Tuners | Holley | Diablo

PCM failure

Thread Tools
 
Search this Thread
 
Old Dec 23, 2011 | 10:47 AM
  #21  
wait4me's Avatar
TECH Addict
iTrader: (10)
 
Joined: Feb 2003
Posts: 2,961
Likes: 2
From: warsaw, in
Default

Originally Posted by Frozen WS6
The op stated it won't communicate at all.
Neither will mine. I've tried my tech 2 and efi live no luck. So I can't get and don't have any codes, no fuel pump, or odometer. I've got nothing. It just cranks.

Hmm ok, As long as you are sure that the ignition is getting ignition to the ecm. when key turned on, all pink wires on the harness and going to the computer should be getting 12V, and the orange wire should be getting 12v. If thats the case, then a replacement might then be needed. Pretty rare..
Reply
Old Dec 23, 2011 | 10:51 AM
  #22  
Frozen WS6's Avatar
9 Second Club
 
Joined: Dec 2007
Posts: 342
Likes: 0
From: Eagle River, Alaska
Default

Cal. I'll get with you after the holidays in January. Gotta make sure the kids and GF have a good Christmas and new years.
Reply
Old Dec 23, 2011 | 10:56 AM
  #23  
Frozen WS6's Avatar
9 Second Club
 
Joined: Dec 2007
Posts: 342
Likes: 0
From: Eagle River, Alaska
Default

Originally Posted by wait4me
Hmm ok, As long as you are sure that the ignition is getting ignition to the ecm. when key turned on, all pink wires on the harness and going to the computer should be getting 12V, and the orange wire should be getting 12v. If thats the case, then a replacement might then be needed. Pretty rare..
I've been trying to follow wires to check that. That's why I replaces the key switch also because it had the wire casing cracked and had exposed the wire.
Reply
Old Dec 28, 2011 | 08:35 PM
  #24  
CHEVY1MAN72's Avatar
Registered User
 
Joined: Dec 2011
Posts: 3
Likes: 0
Default

I have a 98 camaro with 350 ls1 it roles over but it want start You can get it to start by resetting the ecm/battery & ecm /ignition fuses
Reply
Old Dec 28, 2011 | 09:51 PM
  #25  
Frozen WS6's Avatar
9 Second Club
 
Joined: Dec 2007
Posts: 342
Likes: 0
From: Eagle River, Alaska
Default

New fuses and relays did not work on mine. That's what I checked and replaced first.
Reply




All times are GMT -5. The time now is 04:11 PM.